SAFETY DATA SHEET DB130-07 Section 1. Identification Product name Product code Other means of identification : DURA CLEAN® Semi-Gloss Interior Latex Paint + Primer Ultra White : DB130-07 : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Not applicable. Manufacturer : DUTCH BOY 101 Prospect Avenue N.W. Cleveland, OH 44115 Emergency telephone number of the company : (216) 566-2917 Product Information Telephone Number : Not available.
Section 2. Hazards identification Supplemental label elements WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Adequate ventilation required when sanding or abrading the dried film. If Adequate ventilation cannot be provided wear an approved particulate respirator (NIOSH approved). Follow respirator manufacturer's directions for respirator use. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE.
Section 4. First aid measures Eye contact : No known significant effects or critical hazards. Inhalation : No known significant effects or critical hazards. Skin contact : No known significant effects or critical hazards. Ingestion : No known significant effects or critical hazards. Over-exposure signs/symptoms Eye contact : No specific data. Inhalation : No specific data. Skin contact : No specific data. Ingestion : No specific data.
Section 6. Accidental release measures Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Methods and materials for containment and cleaning up Small spill Large spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble.
Section 8. Exposure controls/personal protection TWA: 30 MG/M3 / 2 x (%SiO2+2) 8 hours. Form: Total dust ACGIH TLV (United States, 3/2015). TWA: 0.025 mg/m³ 8 hours. Form: Respirable fraction NIOSH REL (United States, 10/2013). TWA: 0.05 mg/m³ 10 hours.
Section 9. Physical and chemical properties Melting point : Not available. Boiling point : 100°C (212°F) Flash point : Closed cup: >93.3°C (>199.9°F) Evaporation rate : 0.09 (butyl acetate = 1) Flammability (solid, gas) : Not available. Lower and upper explosive (flammable) limits : Not available. Vapor pressure : 0.31 kPa (2.333 mm Hg) [at 20°C] Vapor density Relative density : 1 [Air = 1] : 1.29 Solubility : Not available. Partition coefficient: noctanol/water : Not available.
Section 11. Toxicological information Mutagenicity Not available. Carcinogenicity Not available. Classification Product/ingredient name OSHA IARC NTP Titanium Dioxide Cristobalite - 2B 1 Known to be a human carcinogen. Reproductive toxicity Not available. Teratogenicity Not available. Specific target organ toxicity (single exposure) Not available.
Potential chronic health effects Not available. General : No known significant effects or critical hazards. Carcinogenicity : May cause cancer. Risk of cancer depends on duration and level of exposure. Mutagenicity : No known significant effects or critical hazards. Teratogenicity Developmental effects Fertility effects : No known significant effects or critical hazards. : No known significant effects or critical hazards. : No known significant effects or critical hazards.
Section 14. Transport information DOT Classification TDG Classification Mexico Classification IATA IMDG UN number Not regulated. Not regulated. Not regulated. Not regulated. Not regulated. UN proper shipping name - - - - - Transport hazard class(es) - - - Packing group - - - - - Environmental hazards No. No. No. No. No.
Section 16. Other information Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Although HMIS® ratings are not required on SDSs under 29 CFR 1910. 1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may be purchased exclusively from J. J.