SAFETY DATA SHEET DB801-07 Section 1. Identification Product name Product code Other means of identification : MAXBOND® Flat Exterior 100% Acrylic Latex Paint + Primer Ultra White : DB801-07 : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Not applicable. Manufacturer : DUTCH BOY 101 Prospect Avenue N.W.
Section 2. Hazards identification Response Storage Disposal Supplemental label elements Hazards not otherwise classified : Get medical attention if you feel unwell. IF exposed or concerned: Get medical attention. : Store locked up. Dispose of contents and container in accordance with all local, regional, national and international regulations. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Section 4. First aid measures Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel.
Section 5. Fire-fighting measures Hazardous thermal decomposition products Special protective actions for fire-fighters Special protective equipment for fire-fighters : Decomposition products may include the following materials: metal oxide/oxides : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.
Section 7. Handling and storage Conditions for safe storage, including any incompatibilities : Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Store locked up. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Section 8. Exposure controls/personal protection Appropriate engineering controls Environmental exposure controls : If user operations generate dust, fumes, gas, vapor or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. : Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.
Section 9. Physical and chemical properties Vapor pressure : 0.31 kPa (2.333 mm Hg) [at 20°C] Vapor density Relative density : 1 [Air = 1] : 1.43 Solubility : Not available. Partition coefficient: noctanol/water : Not available. Auto-ignition temperature : Not available. Decomposition temperature : Not available. Viscosity : Kinematic (room temperature): >0.205 cm2/s (>20.5 cSt) Kinematic (40°C (104°F)): >0.205 cm2/s (>20.5 cSt) : Not applicable.
Section 11. Toxicological information Not available. Carcinogenicity Not available. Classification Product/ingredient name OSHA IARC NTP Titanium Dioxide Cristobalite crystalline silica, respirable powder - 2B 1 1 Known to be a human carcinogen. Known to be a human carcinogen. Reproductive toxicity Not available. Teratogenicity Not available. Specific target organ toxicity (single exposure) Not available.
Short term exposure Potential immediate effects : Not available. Potential delayed effects : Not available. Long term exposure Potential immediate effects : Not available. Potential delayed effects : Not available. Potential chronic health effects Not available. General : Causes damage to organs through prolonged or repeated exposure. Carcinogenicity : May cause cancer. Risk of cancer depends on duration and level of exposure. Mutagenicity : No known significant effects or critical hazards.
Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.
Section 15. Regulatory information SARA 313 SARA 313 (40 CFR 372.45) supplier notification can be found on the Environmental Data Sheet. California Prop. 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Section 16. Other information Hazardous Material Information System (U.S.A.) Health * 2 Flammability 0 Physical hazards 0 The customer is responsible for determining the PPE code for this material.
Section 16. Other information ensure that his activities comply with all country, federal, state, provincial or local laws. The conditions for use of the product are not under the control of the manufacturer; the customer/buyer/user is responsible to determine the conditions necessary for the safe use of this product.