SAFETY DATA SHEET DB655-09 Section 1. Identification Product name Product code : Platinum® Plus Interior Acrylic Eggshell Accent/Base D : DB655-09 Other means of : Not available. identification CAS # : Not applicable. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Not applicable. Manufacturer : DUTCH BOY 101 Prospect Avenue N.W.
Section 2. Hazards identification Storage : Store locked up. Disposal : Dispose of contents and container in accordance with all local, regional, national and international regulations. Supplemental label elements Hazards not otherwise classified WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Adequate ventilation required when sanding or abrading the dried film.
Section 4. First aid measures Most important symptoms/effects, acute and delayed Potential acute health effects Eye contact : No known significant effects or critical hazards. Inhalation : No known significant effects or critical hazards. Skin contact : May cause an allergic skin reaction. Ingestion : No known significant effects or critical hazards. Over-exposure signs/symptoms Eye contact : No specific data. Inhalation : No specific data.
Section 6. Accidental release measures Personal precautions, protective equipment and emergency procedures For non-emergency personnel : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate.
Section 8. Exposure controls/personal protection Control parameters Occupational exposure limits (OSHA United States) Ingredient name Exposure limits 1,2-Benzisothiazolone Cristobalite None. OSHA PEL Z3 (United States, 6/2016). TWA: 250 mppcf / 2 x (%SiO2+5) 8 hours. Form: Respirable TWA: 10 mg/m³ / 2 x (%SiO2+2) 8 hours. Form: Respirable TWA: 30 mg/m³ / 2 x (%SiO2+2) 8 hours. Form: Total dust OSHA PEL (United States, 6/2016). TWA: 50 µg/m³ 8 hours.
Section 8. Exposure controls/personal protection Body protection Other skin protection Respiratory protection : Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Section 10. Stability and reactivity Hazardous decomposition products : Under normal conditions of storage and use, hazardous decomposition products should not be produced. Section 11.
Symptoms related to the physical, chemical and toxicological characteristics Eye contact : No specific data. Inhalation : No specific data. Skin contact : Adverse symptoms may include the following: irritation redness : No specific data. Ingestion Delayed and immediate effects and also chronic effects from short and long term exposure Short term exposure Potential immediate : Not available. effects Potential delayed effects : Not available.
Section 12. Ecological information Soil/water partition coefficient (KOC) : Not available. Other adverse effects : No known significant effects or critical hazards. Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.
Section 15. Regulatory information SARA 313 SARA 313 (40 CFR 372.45) supplier notification can be found on the Environmental Data Sheet. California Prop. 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Section 16. Other information Hazardous Material Information System (U.S.A.) Health * 1 Flammability 0 Physical hazards 0 The customer is responsible for determining the PPE code for this material.
Section 16. Other information determine the conditions necessary for the safe use of this product. The customer/buyer/user should not use the product for any purpose other than the purpose shown in the applicable section of this SDS without first referring to the supplier and obtaining written handling instructions. Due to the proliferation of sources for information such as manufacturer-specific SDS, the manufacturer cannot be responsible for SDSs obtained from any other source.