Technical Specifications

Product Data Sheet
Dutch Boy® Platinum® Plus Interior 100% Acrylic Paint + Primer
with Stain-Shield Technology is an ultra premium, high-performance
coating that offers exceptional stain resistance and allows stains to
be easily wiped away from the painted surface. In addition to
providing a durable, mildew-resistant finish, our advanced No Prep,
No Prime formula eliminates the need for extensive surface
preparation, helping you complete projects faster and with fewer
steps. Not only does Platinum Plus Paint + Primer adhere to difficult
surfaces such as smooth, glossy paint, but it does so without the
need to sand or prime. Platinum Plus Paint + Primer provides
exceptional beauty with less effort and is available in the easy-to-use
Dutch Boy Twist & Pour® container.
Platinum® Plus Interior
100 % Acrylic Enamel
Paint + Primer
Features
Paint + Primer with Stain-Shield Technology offers exceptional
stain resistance and allows stains to be easily wiped away from
the painted surface
Excellent stain blocking ability seals most common household
stains
Extreme hide provides excellent coverage in less coats
Highly scrubbable and washable for an extremely durable
finish that will keep your walls looking like new
Achieved GREENGUARD® Gold Certification for indoor air
quality
Backed by an unconditional satisfaction, lifetime warranty
Where To Use
Good for every room in the house. Use on properly prepared
interior walls, trim and ceilings of previously painted or bare
drywall, plaster, masonry, wood and primed metal.
Recommended Systems
Application
Brush: Nylon/Polyester
Roller: Synthetic, 1/4" 1/2" Nap
Sprayer Airless: 2000 psi, .015" .019" Tip
Clean Up/Disposal
Clean hands and tools with warm, soapy water.
Promptly wipe up spills and spatters with a damp cloth.
In event of a spill, absorb with inert material such as sand or
kitty litter.
Dispose of empty container or unused portion in accordance
with local, state, and federal regulations.
After cleaning, flush spray equipment with mineral spirits to
prevent rusting of the equipment. Follow manufacturer’s
safety recommendations when using mineral spirits.
The No-Prep, No-Prime feature enables Platinum® Plus coating to
be applied directly over sound, non-peeling, previously painted
glossy surfaces or uncoated drywall, plaster, masonry and non-
bleeding wood without the need to sand or prime.
Previously Painted Surfaces:
Use Platinum® Plus Paint + Primer to spot prime bare areas,
allow to dry, then paint entire surface.
1-2 coats of Platinum® Plus Paint + Primer
Bare Surfaces: Drywall, Plaster, Masonry, Non-Ferrous Metal,
and Wood:
1-2 coats of Platinum® Plus Paint + Primer
The first coat of Platinum® Plus Paint + Primer serves as a
priming coat and the second coat provides final appearance
and performance.
Severely Stained/Bleeding Surfaces:
Platinum® Plus seals most common household stains (such as dirt,
ketchup, mustard, crayon, pen, coffee, etc.) without the use of a
separate stain-blocking primer.
Extreme household stains, watermarks, wood knots, bleeding
woods such as cedar and redwood, or other surfaces where
paint adhesion or stain suppression is a particular problem,
use an appropriate primer.
1-2 coats of Platinum® Plus Paint + Primer
Maintenance
Freshly painted surfaces may be washed after 30 days. Clean with
mild, non-abrasive, non-oily cleanser and water.
Apply when surface, air and product temperatures are above
50˚F. Paint dries best between 65˚F and 85˚F.
Stir paint thoroughly. Mix gallons together when using more
than one gallon of the same product.
Brush a 3" border around all edges.
Fill the roller completely. Apply paint in the form of an "N". Fill
the center of the "N" with horizontal strokes from side to side.
Lightly smooth out with vertical strokes. Repeat "N" pattern
with a freshly loaded roller, continuing to work in 2’ by 2‘
sections.
Always roll from the dry, unpainted area into the wet edge.
Other methods may require multiple coats for a professional-
looking finish.
Cautions
Protect from freezing
For interior use only
DB652 Series Flat
DB655 Series Eggshell
DB656 Series Satin
DB653 Series Semi-Gloss
Touch: 1 hour
Recoat: 4 hours
DRY TIME (@77˚F, 50% R.H.):
COVERAGE:
APPLICATION: CLEAN UP:
Brush: nylon/polyester
Roller: 1/4" - 1/2" synthetic nap
Spray (Airless): 2000 psi Tip .015" - .019 "
Warm soapy water
400 sq. ft./gal (smooth)
125 - 300 sq. ft./gal
(rough surface)
For more information, please call 1-800-828-5669, or visit www.dutchboy.com
PLATINT

Summary of content (2 pages)