User Manual

B1
B2
EN 14
Cleaning the device
• Never use aggressive or abrasive cleaning materials, cleaning alcohol or sharp objects
like hard brushes or knives.
• Clean the exterior of the casing with a damp cloth.
• Then dry the exterior with a dry cloth.
Note:
• The device CANNOT be immersed in water.
Warning! Do not touch the evaporator surface with bare
hands. Risk of injury!
SIDE FILTERS
• Remove the plug from the power socket.
• The side lters can only be accessed when the top back panels are
removed from the device!
• Pull out the back panels (A1) & (A2) to gain access to the side lters,
as described above.
• Slowly slide the side lters out of the device.
• Remove the lter from the device.
• Remove the lter mash from the device.
• Use a clean rag to absorb the surface dust on the lter mash. If the
lter is extremely dirty, use tap water to rinse the lter. Fully dry the
lter before placing it back in the device.