User Manual

19
EN
7. Use
7.1. Product modes
• Standby mode: The product is connected
to the power source but not turned on. The
product can receive input from the control
panel, remote control or Duux app. The
standby icon lights up .
• Sleep mode: The product is turned on. The
night mode icon lights up at half of the
brightness. The other icons are not shown on
the display. The product produces no sound
signals.
• Awake mode: The product is turned on. Press
any button to activate the awake mode from
the sleep mode. Press the power button
R to activate the awake mode from the
standby mode. The display shows the room
temperature and all active function icons light
up.
7.2. Turning on the product
1. Plug the power plug 9 into the power
source.
2. Toggle the power rocker switch 7 on the
product from O to I.
- The product makes a beep sound.
- The product is now in standby mode.
- The standby icon
on the display lights up.
3. Press the power button v on the product
or the remote control to turn on the product.
- The product makes a beep sound.
- The standby icon turns o.
- The product resumes in the thermostat
function with the previous set temperature.
- The display shows the room temperature
along with the thermostat icon .
NOTICE
• When the product is used for the rst time, the
product will start in the thermostat function with
a default set temperature of 20˚C.
7.3. Thermostat function
The thermostat function lets the user chose the
desired room temperature.
The product actively heats the room to maintain
the chosen temperature. The thermostat
function is on by default.
7.3.1. Setting the temperature
1. Press the thermostat button O.
- The product makes a beep sound.
- The current set temperature and the
thermostat icon starts ashing.
NOTICE
• Step 1 is optional. To adjust the temperature
directly, start with step 2.
2. Press the increase button
T or decrease
button Y to adjust the temperature.
- Wait for 3 seconds.
- The set temperature and the thermostat icon
stop ashing and light up for 2 seconds,