User Manual

23
EN
NOTICE
• The following applies to the Cabin mode.
- The product makes a beep sound.
- The number “30” starts ashing on the
display.
3. Press the increase button T or decrease
button Y and select the desired duration of
the schedule in days – 1 to 30 days.
- Wait for 3 seconds.
- The set number stops ashing and lights up
for 2 seconds, showing that the chosen value
is conrmed.
- The product returns to awake mode.
- The schedule icon lights up on the display
to indicate that the schedule function is
activated.
NOTICE
• Press the thermostat button O to check the
current set temperature of the schedule.
• Pressing the thermostat button O does not
change the temperature setting.
7.5.3. Adjusting the temperature of a
schedule
To overwrite the temperature of a schedule, see
chapter
Setting the temperature.
Adjusting the temperature via the thermostat
function temporarily overwrites the set
temperature of the schedule without deactivating
the schedule function. The overwritten
temperature remains until the start of the next
time slot of the preset schedule.
The thermostat icon
and the schedule icon
light up on the display to show that a temporary
change in temperature is made while the
schedule function is active.
7.5.4. Deactivating a schedule
1. Press and hold the schedule button P for 3
seconds.
- The product makes a beep sound.
- The schedule icon is not shown on the
display anymore to indicate that the schedule
function is deactivated.
7.5.5. Custom schedules
It is possible to change the predened time
slots and the default high and low temperatures
of the schedules in the Duux app. Make sure
the product is connected to Wi-Fi - see chapter
Wi-Fi and Duux app operation – and follow the
instructions.
7.6. Night mode function
When the product is in night mode, the display is
at half of the brightness and the sound signal of
the product is deactivated.
7.6.1. Activating the night mode
1. Press the night mode button
U.
- The product makes a beep sound.
- The night mode icon lights up on the
display to indicate that the night mode
function is activated.
- The display dims to half of the brightness.