User Manual

1312
3. Functions 4. Maintenance
Note: see product overview (chapter 1) for
reference.
1
Top cover
The structure of the device allows the mist to be
eciently distributed. Always keep this cover on
when using the device. Hold and lift the tab of
the top cover to remove the top cover.
2
Mist outlet
This is where the mist comes out. Blocking the
outlet may cause breakdowns.
3
Water tank
Remove the tank from the device and ll it with
water.
4
Power/water supply indicator
Blue indication means that the device is
powered on. When it blinks red, the water
needs to be relled.
5
Mist output indicators
The selected mist output is lit. Mist volume MIN
(minimum) is on as default setting.
6
Power button
Turns on or turns o the power every time you
press it.
7
Mist output button
You can switch between MAX (maximum) and
MIN (minimum) level of mist output each time
you press it.
Caution: Please be careful not to overhumidify.
Depending on the room size, environment and use,
it can lead to wet oors due to condensation.
8
Light button
You can switch the bottom light o and on each
time you press this button.
9
Power cable
Directly connect the plug to a wall outlet.
10
Water tank cap
Please remove the cap when pouring water into
the water tank. After pouring, close it tightly.
11
Anti-scale and antibacterial cartridge
This cartridge will reduce the hardness of the
water and prevents white dust produced by
ultrasonic mist. It also removes bacteria from
the water for hygienic mist output.
12
Water supply entrance
Use this entrance to ll the tank with water.
13
Ultrasonic membrane
Mist is created due to ultrasonic sound waves.
You can adjust the amount of mist with the mist
button.
Caution: Please regularly clean the device for
long-lasting use. Depending on the hardness of the
local tap water, we advise to use distilled water.
Important: Be sure to remove the power plug
from the outlet before carrying out maintenance.
Important: Do not soak or immerse the power
plug or the device in water.
Clean water tank every 3 days
Daily maintenance
1
Switch the power button to OFF and remove
the power plug;
2
Remove the top cover and water tank from the
device.
3
Remove the water tank from the device and
throw away the water remaining in the water
tank.
4
Pour a small amount of water into the water
tank, rmly close the water tank cap and shake
to rinse.
Note: Only drain water via the designated side,
marked with a label. If you drain via other side, the
product will leak and can lead into short cut.
EN