lnstruction Manual DUVOSS Q1
Take out the earbuds English Before using the earbuds for the first time. put them back into the charging compartment and close the charging compartment. Connect it to the Type-c cable to charge the Bluetooth earbuds DUVOSS Q1. In the power-on state, put the left and right earbuds in the charging compartment, they will automatically shut down and the charging starts. Power on : The charging compartment is turned on when the cover is opened.
Cohnect the device After trying earbuds are turned on, the Bluetooth interface of the mobile phone will display the device named ‘DUVOSS Q1’; click to successfully connect. The default PIN code for Bluetooth is ‘0000’.
Light status description Charge: Insert Type_C to charge the green light flashes slowly, full: the green light keeps on prompt low battery : The battery power is less than 10%, the LED red light is on, and it flashes slowly for 60 seconds. Put the headset in the charging compartment: KEY OPERATION If one of the earphones is not charged, the yellow light flashes to indicate(If the headset does not show a yellow light in the cabin) Product parameter Bluetooth name : DUVOSS Q1 Voltage : 3.
pairing Change pairing. power off. charge 1.After power on, the Bluetooth earbuds will automatically connect to the last paired mobile phone. 2. If you need to pair other mobile phones. please turn off the Bluetooth of the original phone. After turning on the Bluetooth earbuds, turn on the Bluetooth of other mobile phones to search for the device name DUVOSS Q1. 3. WhenOPERATION the music is paused, the earbuds stay in standby mode KEY with very low power consumption. 4.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.