Specifications

10
F. CHANNEL PANS (CHANNEL ASSIGNMENT SWITCHES)
The new DV Promix 3 Audio Mixer contains front panel mounted pan switches.
These pan switches are used to route the individual input channel’s signal to
either the left or right summing buss and subsequent left and right outputs.
When set to the left position, audio from that particular input is routed to the left
output only. When set to the center position, audio from that particular input is
routed to both left and right outputs. When set to the right position, audio form
that particular input is routed to the right output only. These functions are easily
viewed when watching the meters. If you have a particular input set “panned” to
the left only, you will see the audio register on the left output meter only. The
same holds true for inputs panned to the right. In that case, you will only see
activity on the right meter.
OUTPUTS:
A. BALANCED OUTPUTS (XLR Connectors)
The DV Promix 3 Mixer contains very high quality electronically balanced
outputs. This circuitry has been designed to provide wide bandwidth, low
distortion and real-world ease of use. These outputs are available via the right
hand panel mounted male XLR connectors. These outputs are switchable
between line level, consumer line level or microphone levels. In the 0dB setting,
the mixer will nominally output a 0dBv signal (Line Level) In the –10dB setting,
the mixer will nominally output a –10dBv signal (Consumer Line Level) and in the
–40dB setting, the mixer will output a –40dBv signal (Microphone Level).