Specifications

18
The PSC DV Promix 3 Mixer is especially designed for easy interfacing with all
popular DV Cameras. The DV Promix 3 is equipped with two XLR male
connectors on the right side panel. These XLR outputs can provide audio at
either Line Level (0dBv) Consumer Line Level (-10dB) or Microphone Level (-
40dBv). These outputs are normally used to feed audio to any device with
balanced (XLR) inputs. You can connect your DV Promix to most, but not all
cameras with XLR input connectors using standard XLR microphone cables.
Keep in mind that you must match up the output level of the DV Promix 3 to the
input level required by your camera. I.E. if your camera has microphone level
XLR inputs, then set the DV Promix 3’s output level switches to “-40dB”. On the
other hand, if your camera accepts line level inputs, then you may set the output
level switches to “-10dB or 0dB”.
B: TO PRO-SUMER CAMCORDERS (3.5MM JACK):
The PSC DV Promix 3 is also equipped with a dedicated microphone level output
designed to interface the mixer with cameras that are only equipped with a
3.5mm external microphone input jack. To interface this mixer to these types of
cameras, you simply need to plug in one end of the supplied 3.5mm cable to the
DV Promix 3’s “MIC” output jack and the other end into your camera’s external
MIC input jack. The DV Promix 3 has special circuitry incorporated to block your
cameras built in mic powering from interfering with the DV Promix operation.