v.29.march.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions; 2) Keep these instructions; 3) Heed all warnings; 4) Follow all instructions; 5) Do not use this apparatus near water; 6) Clean only with dry cloth; 7) Do not block any ventilation openings.
A Word from Marco De Virgiliis MARK VISION Thank you for choosing the DV MICRO head! In the years i made Markbass a world leader brand in the bass amps segment, using technology to better serve bass players needs: great tone, reliability, versatility/flexibility and light weight.
OVERVIEW DV MICRO 50 II We made a few upgrades to our DV Micro 50 best seller head. The DV Micro 50 II features the FX Loop and a new designed Lead Channel, together with Aux In and Headphone connections. DV MICRO 50 Metal This head is for hard rock and metal players looking for a high gain tone on the Lead Channel. A particularly scooped EQ makes way easier to get any sound in the heavy style palette. On board Reverb and FX Loop give this little monster anything a metal dude could need.
FRONT PANEL - DV MICRO 50 II - DV MICRO 50 M - DV MICRO 50 CMT 1) INPUT Connect your guitar to this input using a standard ¼” shielded instrument cable. It’s also designed to perfectly interface with all the effects most used by guitarists. 2) LEVEL This knob sets the input level, turn it up gradually until you reach your desidered volume. 3) BASS This knob controls the amount of low frequencies in your sound.
REAR PANEL 7 9 8 Reverb 12 - DV MICRO 50 II - DV MICRO 50 M - DV MICRO 50 CMT Clean Drive Overdrive Bass Level Hi Off ― Overdrive 15) AC POWER SOCKET Make sure the unit is grounded; all three terminals of the AC power plug must be connected to avoid any injury to the user On or damage to the unit.
TECHNICAL SPECS - DV MICRO 50 II - DV MICRO 50 M - DV MICRO 50 CMT BLOCK DIAGRAM Channels: Two (clean / lead) Controls: Level (clean ch) Drive / Level (lead ch) EQ Controls: Bass - Mid - High (clean ch) Bass - High (lead ch) Speaker Outputs: Two ¼” Jacks mono out 8 ohm Power Output: 60W @ 4ohm / 50W @ 8ohm Other Features: Footswitch input for channels switch AUX IN Headphones OUT XLR Line OUT with GND Lift Dual Voltage selector 120V/240V (not available on the 100V version
14 Clean ― Overdrive FRONT PANEL - DV MICRO 50 JAZZ On 1) INPUT Connect your guitar to this input using a standard ¼”Input shielded Auxinstrument cable. Clean Level Bass Mid Phones Hi DV Micro 50 CMT 2) LEVEL Start with the Master Level control OFF (all the way counter-clockwise) and turn it up gradually until you reach your deidered volume. 1 11 2 3) BASS This knob controls the amount of low frequencies in your sound.
JAZZ REAR PANEL - DV MICRO 50 JAZZ DV MICRO 50 10) AC POWER SOCKET Make sure the unit is grounded; all three terminals of the AC power plug must be connected to avoid any injury to the user or damage to the unit.
TECHNICAL SPECS - DV MICRO 50 JAZZ Channels: One (clean) BLOCK DIAGRAM Controls: Level EQ Controls: Bass - Mid - High Speaker Outputs: Two ¼” Jacks mono out 8 ohm Power Output: 60W @ 4ohm / 50W @ 8ohm Input Other Features: Footswitch input for reverb on/off TONES AUX IN Headphones OUT XLR Line OUT with GND Lift Dual Voltage selector 120V/240V (not available on the 100V version manufactured for Japan) Level Dimensions: Weight: 200 x 64 x 221 mm / 7.87” x 2.51” x 8.
Product specifications are subject to change without notice www.markbass.it www.momark.it www.markaudio.it srl Italy - 66020 San Giovanni Teatino CH - Via Po, 52 Tel: +39 0854407764 / 0854465705 - Fax: +39 0854407764 / 0854407399 - www.dvmark.it - info@dvmark.
