0 5 2 v.03.november.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions; 2) Keep these instructions; 3) Heed all warnings; 4) Follow all instructions; 5) Do not use this apparatus near water; 6) Clean only with dry cloth; 7) Do not block any ventilation openings.
A Word from Marco De Virgiliis MARK VISION As it happened in the bass world, we’ve been the first introducing lightweight, portable, powerful and great sounding heads on the guitar market. Thanks to the great success of the DV Micro 50 and DV Little 250 heads we added many new models and we created a brand new series where any guitar player will find the right amp matching his needs and music style.
FRONT PANEL 9 10 11 12 13 7 8 15 1) INPUT Connect your guitar to this input using a standard ¼” shielded instrument GAIN BASS MID HIGH LEVEL OFF REVERB cable. 2) GAIN This knob sets the gain level of the clean channel. 3) BASS This knob controls the amount of low frequencies in your sound. DV LITTLE GH 250 4) MID The Mid control regulates the midrange frequencies and it is an important part ON of your tone shaping.
D clean REAR PANEL LITTLE 250 M on gain bass high level 16) AC POWER SOCKET Make sure the unit is grounded; all three terminals of input the AC power plug mustmidbe connected to avoid anyfswinjury to the user or damage to the unit. 4 1 2 3 5 6 14 17/18) SPEAKER OUT The DV Little GH 250 can be connected to one or two speaker cabinets (minimum load 4 ohm, the speaker outputs are in parallel).
TECHNICAL SPECS Channels: Controls: EQ Controls: Reverb: BLOCK DIAGRAM Two (clean / lead) Gain / Level (clean ch) Bass - Mid - High (clean / lead) common Input Gain TONES Level Level Speaker Outputs: Power Output: Other Features: One ¼” Jacks / One SPEAKON COMBO (parallel wiring, minimum load 4 ohm)v 250W @ 4ohm / 150W @ 8ohm Footswitch input for channels switch FX send / return Pre OUT with level select switch (0/-6dB) Dimensions: Weight: DV LITTLE GH 250 / 250
NOTE 7
FRONT PANEL 1) INPUT Connect your guitar to this socket using a standard ¼” shielded instrument cable. This stage has been designed to perfectly interface with all the guitarists most used effects. 2) LEVEL This knob sets the input level, turn it up gradually until you reach your desired volume. 3) BASS This knob controls the amount of low frequencies in your sound. 4) MID The Mid control regulates the midrange frequencies and it is an important part of your tone shaping.
REAR PANEL 9) AC POWER SOCKET Make sure the unit is grounded; all three terminals of the AC power plug must be connected to avoid any injury to the user or damage to the unit. 8 10/11) SPEAKER OUT The DV “RAW DAWG” EG can be connected to one or two speaker cabinets (minimum load 4 ohm, the speaker outputs are in OFF parallel). The speaker JACK (10) accepts ¼” Jack speaker cables, the SPEAKON COMBO (11) accepts either a SPEAKON or a ¼” Jack speaker cable. Do not use instrument cables.
TECHNICAL SPECS Channels: One Controls: Level EQ Controls: Bass - Mid - High Effect: Reverb BLOCK DIAGRAM Speaker Outputs: Power Amp: Power Output: Other Features: One ¼” Jacks / One SPEAKON COMBO (parallel wiring, minimum load 4 ohm)v MPT (Mark Proprietary Technology) 250W @ 4ohm / 150W @ 8ohm Footswitch input for reverb switch FX send / return Pre OUT with level select switch (0/-6dB) Dimensions: Weight: 225 x 80 x 250 mm / 8.86” x 3.15” x 9.
NOTE 11
FRONT PANEL CLEAN LEAD 9 10 11 12 13 7 8 15 1) INPUT Connect your guitar to this input using a standard ¼” shielded instrument GAIN LOW HIGH LEVEL REVERB OFF MID cable. LEAD 2) GAIN (CLEAN) This knob sets the gain level of the clean channel. CLEAN 3) LOW This knob controls the amount of low frequencies in your sound. GAIN LOW HIGH LEVEL FSW MID 4) MID The Mid control regulates the midrange frequencies and it is an important part ON of your tone shaping.
REAR PANEL 16) AC POWER SOCKET Make sure the unit is grounded; all three terminals of the AC power plug must be connected to avoid any injury to the user or damage to the unit. 7 8 9 10 11 12 13 LOW MID HIGH LEVEL FSW LEAD 15 outputs 17/18) SPEAKER OUT The FG LITTLE 250 AMPLITUDE can be connected to one or two speaker cabinets (minimum load 4 ohm, the speaker GAIN LOW HIGH LEVEL REVERB OFF MID are in parallel).
TECHNICAL SPECS Channels: Two Controls (each ch): Level EQ Controls: Bass - Mid - High Effect: Reverb BLOCK DIAGRAM Input Speaker Outputs: Power Amp: Power Output: Other Features: One ¼” Jacks / One SPEAKON COMBO (parallel wiring, minimum load 4 ohm)v MPT (Mark Proprietary Technology) 250W @ 4ohm / 150W @ 8ohm Footswitch input for reverb switch FX send / return Pre OUT with level select switch (0/-6dB) Dimensions: Weight: 225 x 80 x 250 mm / 8.86” x 3.15” x 9.
NOTE 15
Product specifications are subject to change without notice www.markbass.it www.momark.it www.markaudio.it srl Italy - 66020 San Giovanni Teatino CH - Via Po, 52 Tel: +39 0854407764 / 0854465705 - Fax: +39 0854407764 / 0854407399 - www.dvmark.it - info@dvmark.
