Installation Guide

– 2 – MAY 19, 2009
Figure 2
4. Locate mailbox keys and open access door in the fully open position
5. Place and align the mailbox on the post bracket over the bottom set of holes as shown in Figure 3, and
install 4 of each of the following: 5/16” -18 x 5/8” long hex head bolts, 5/16” x 5/64” thick lock washers
and 13/16” OD flat washers. Tighten as needed
Figure 3
IT IS IMPORTANT TO NOTE THAT IT IS NOT THE RESPONSIBILITY OF MAIL CARRIERS TO OPEN MAILBOXES THAT ARE
LOCKED, ACCEPT KEYS FOR THIS PURPOSE, OR LOCK MAILBOXES AFTER DELIVERY OF MAIL.
dVault® Company, Inc. • 9800 Mount Pyramid Court • Suite 400 • Englewood, Colorado • 80112
Phone: [phone] • Fax: [phone] • World Wide Web: http://www.dvault.com
Rev A
05-18-2009