Table of Contents
Introduction The wall plate is a 2x1 switcher and HDBaseT transmitter with HDMI and USB-C input. It features a US one-gang enclosure for Decora-style wall plate openings. The USB-C input provides an ideal AV interface for connecting with new Apple notebooks and Windows® PCs as well as smartphones and tablets. Supporting video resolution up to 4K@60Hz 4:4:4, the product is remotely powered by the receiver or other HDBaseT-equipped devicesvia POE. Features • Compliant with HDMI 2.0b, HDCP 2.
Specifications
Product Dimensions
Operation Controls and Functions Transmitter Panel 1 Power LED indicator will illuminate in green when the product is powered on, and red when the product is on standby. 2 HDMI LED will be on when the HDMI input port is active and the HDMI signal is detected. 3 USB-C LED will be on when the USB-C input port is active and USB-C signal is detected. 4 HDMI Port: Connect to HDMI source device. 5 USB-C Port: For USB-C signal input or charging USB-C devices.
Receiver Panel 1 Power LED indicator will be on when the product is powered on. 2 DC 24V: Power supply port. 3 FW Firmware update port. 4 HDBaseT IN: Connect to transmitter with a CAT6/6a/7 cable. 5 HDMI OUT: Connect to HDMI display device. 6 HDMI IN: Connect to HDMI source device. 7 AUDIO OUT: Analog audio output port. 8 USB Port: Two USB ports for KVM function. Note: This transmitter supports automatic/manual mode for source signal input.
Application Example
Warranty Terms and Conditions For the following cases we shall charge for the service(s) claimed for the products if the product is still remediable and the warranty becomes unenforceable or inapplicable. 1. The original serial number (specified by us) labeled on the product has been removed, erased, replaced, defaced or is illegible. 2. The warranty has expired. 3.
