User Manual

Operation Controls and Functions
Transmitter Panel
1 Power LED indicator will illuminate in green when the product is powered on,
and red when the product is on standby.
2 HDMI LED will be on when the HDMI input port is active and the HDMI
signal is detected.
3 USB-C LED will be on when the USB-C input port is active and USB-C
signal is detected.
4 HDMI Port: Connect to HDMI source device.
5 USB-C Port: For USB-C signal input or charging USB-C devices.
6 CHARGE Port: Connect this port to power supply, then the USB-C port will
power the connected device.
7 USB-B Port: Connect to the computer’s USB port.
8 SOURCE Button: Used to switch HDMI / USB-C input signal.
9 HDBaseT OUT: Connect to receiver with CAT6/6a/7 cable.
10 Micro-USB: Firmware update port.