User Manual

Receiver Panel
1 Power LED indicator will be on when the product is powered on.
2 DC 24V: Power supply port.
3 FW Firmware update port.
4 HDBaseT IN: Connect to transmitter with a CAT6/6a/7 cable.
5 HDMI OUT: Connect to HDMI display device.
6 HDMI IN: Connect to HDMI source device.
7 AUDIO OUT: Analog audio output port.
8 USB Port: Two USB ports for KVM function.
Note:
This transmitter supports automatic/manual mode for source signal input. In
manual switching mode, press the SOURCE button to select HDMI/USB-C
input.
In automatic switching mode, the last connected or the currently connected
source signal will be selected automatically. When both HDMI and USB-C
ports are connected to active signals, HDMI signal input is prioritized. When
neither HDMI and USB-C ports are connected to active signals, it will switch to
the receiver’s source signal.