Installation Guide

Essex Outdoor
DVP9071
DVP9072
DVP9073
DVP9074
1
2
3
4
5
120 Great Gulf Drive
Concord, ON
Canada, L4K 5W1
Tel: [phone]
Fax: [phone]
Warning
All electrical connections must be made according to
local codes. If you feel you do not have the experience
necessary to do this, please have your fixture installed
by a qualified, licensed electrician.
Make sure to note the maximum recommended
wattage for your light fixture - DO NOT E XCEED THE
RECOMMENDED W ATTAG E
Cleaning
We recommend that you use a mild detergent, such as
dish washing soap, and warm water to clean the glass
and metal surfaces. After cleaning, make sure to dry the
fixture completely because moisture will corrode the
satin finish. Use a damp soft cloth to wipe off dust. DO
NOT USE abrasive pads or cleaning materials.
**If you only have two wires coming from the electrical box,
connect the fixture’s copper wire to the Green ground screw
on the crossbar.
Tools
Phillips head screwdriver
A
B
C
A. Copper ground wire to Ground W ire**
B. White Fixture W ire to White Supply W ire.
C: Black Fixture W ire to Black Supply W ire.
DVP9071
1x100W A19
DVP9072
1x100W A19
DVP9073
1x100W A19
DVP9074
1x100W A19