User's Manual

23
2.3 Driver installation under Windows 2000 Professional
2.3.1 Before Installation
Make sure that you install the software in the following order.
1) Install the Application software(refer to 2.1 Installing FusionHDTV Applications)
2) Install hardware(board) (refer to 3.3 Board Installation)
3) Install the Windows 2000 Drivers (refer to 2.3.2 Installing Windows 2000 driver)
4) Check Windows 2000 device manager (refer to 2.3.3 Checking Windows Driver)
2.3.2 Installing Windows 2000 driver
1) Insert the FusionHDTV board into the PCI local bus slot. When Windows
2000 starts, the Add New Hardware Wizard will pop up automatically.
2) When the Digital Signature Not Found window appears, Click on “Yes”.
3) The “Found New Hardware” Wizard window will pop up automatically.