User's Manual

34
3.4 Remote Installation
* Remote transceiver is optional and can be purchased separately through FusionHDTV dealers.
1) Connect the IR receiver module to the PC’s serial port(COM1, COM2…) or USB
port.There are two types receivers serial or USB
2) After IR receiver and FusionHDTV remote software is installed, please reboot and start
the configuration by right clicking the FusionRemote icon at the low right bottom of the
screen. If you do not see the FusionRemote icon in the tray, please start the program
by Start->Program->DViCO->FusionRemote.
3) Please select the port that IR receiver module is attached and press the any button on
the remote transceiver. A Dialog box with the remote transceiver buttons will appear.