User manual

Ultimate PVR with HD Digital Jukebox

4.2 Audio/Video Setting

This section is about A/V (Video or Audio) settings. Press SETUP button on the remote control and select

the A/V.

This screen allows you to adjust the A/V settings of your TVIX-HD to your personal taste. Select

menu to exit this SETUP. Press ‘NEXT’ button to move on to another setting.

Set the audio output setting.

Select the HDMI or the S/PDIF that you want to hear the

audio.

If you select the S/PDIF, you can set the detailed audio

output with your Decoder/Amplifier. We recommend you to

set the Dolby Digital and DTS to digital and AAC to analog.

If you don't hear MP3 or AAC audio, please set the S/PDIF

setting to CUSTOM.

You don’t need set this option when you connect RCA

cable.

Digital Audio output (Digital RAW ) : Select this when you connect the audio with an coaxial/optical

cable for digital audio connection to the Decoder/Amplifier.

Dynamic Range Control : This function is for either decreasing high level sounds or increasing

low level sounds.

[ON]: low volume at late night.

[OFF]: full dynamic range of the volume.

ideo Output : Select this when you want to connect the video through a composite or a HDMI

cable. With HDMI setting, you can select an output resolution between NTSC,PAL, 720p 50hz/60hz,

1080i 50hz/60hz and 1080P 50hz/60hz. 1080i should work on all HD grade TVs.