User manual
Table Of Contents
- TViX M-5000U/ /M-5000A
- Safety Notice
- Usage Precautions
- Table of Contents
- 1 Introduction
- 2 Name of Each Part
- 3 Installation and Connection
- 4 TViX HD Setup Menu
- 5 Easy Usage of TViX HD
- 6 Using the remote control
- 7 Firmware Upgrade
- 8 Using USB Connection with the PC
- 9 Appendix - Technical Terms
- 10 GNU General Public License
12
3.2.3 Connection to Component Output
Connect the TViX HD and your TV with the component cables.
Turn on the TViX HD and TV. Select an appropriate video input mode on
your TV (in this case, the Component input mode).
3.2.4 Connection to DVI Output
Simply connect your TViX HD to the DVI port on the TV.
However, if the TV has a HDMI port only, you need to buy a HDMI cable
to convert the DVI data and then you will be able to see the processing
digital signal.
CAUTION
After you connect the video cable to your TV, press the TV Out button repeatedly on your remote control
until you get the initial TViX screen.
* The component cable is not included in the TViX and must be purchased separately.