User manual
Table Of Contents
- TViX M-5000U/ /M-5000A
- Safety Notice
- Usage Precautions
- Table of Contents
- 1 Introduction
- 2 Name of Each Part
- 3 Installation and Connection
- 4 TViX HD Setup Menu
- 5 Easy Usage of TViX HD
- 6 Using the remote control
- 7 Firmware Upgrade
- 8 Using USB Connection with the PC
- 9 Appendix - Technical Terms
- 10 GNU General Public License
14
3.4 LAN Connection
3.4.1 Connect PC via Network
< When connecting the computer directly to the TViX HD >
Connect the LAN cable to the LAN port of both the TViX HD and the PC.
< When connecting with IP Router or Hub >
Connect the LAN cable to the LAN port for an IP Router or Hub.
With NFS, M-5000U can play tp files on a PC flawlessly through LAN.
We recommend NFS connection than SAMBA. You need to install TViX Netshare program on a PC but the
setting became much easier SAMBA method.
You can download NetShare installer from our website www.tvix.co.kr/Eng
before you configure NFS network.
Please refer to the Netshare program manual for detailed instructions.
http://www.tvix.co.kr/eng/support/Manual.aspx
You may skip the 3.4.2 section if you select to NFS network.
TIPS
In this case, you generally use a LAN cross cable type.
If the computer’s LAN card was connected to an Internet line, you can install an additional LAN
card to your PC and connect that LAN card to the TViX.
TIPS
In this case, you generally have to use Direct LAN Cable type.