User manual
Table Of Contents
- TViX M-5000U/ /M-5000A
- Safety Notice
- Usage Precautions
- Table of Contents
- 1 Introduction
- 2 Name of Each Part
- 3 Installation and Connection
- 4 TViX HD Setup Menu
- 5 Easy Usage of TViX HD
- 6 Using the remote control
- 7 Firmware Upgrade
- 8 Using USB Connection with the PC
- 9 Appendix - Technical Terms
- 10 GNU General Public License
22
3.5 HDD Installation/Exchange
Warning: If you change the HDD of a TViX equipped with an HDD, the warranty will be voided.
1. Assembling the TViX HD is very easy. Just follow the instructions below:
Use a driver and screw the hard disk on to the guide board.
Set the jumper to ‘Single Master’.
< Jumper Settings >
The ‘Jumper Setting’ differs according to the HDD manufacturers, so please refer to the instructions
of the specific HDD provided by the HDD manufacturers.
2. Open the cover case in the direction of the arrow.
PULL
LOCK OPEN
SAMSUNG Seagate IBM Western Digital
Power Connector