User manual

Ultimate Player with HD Digital Jukebox
22
4.4 NETWORK Setting
This section is about NETWORK (Network or FTP) settings. Press the SETUP button on the remote control,
and then select NETWORK.
This screen allows you to adjust the NETWORK settings of your TVIX-HD to your personal taste. Select
menu to exit this SETUP. Press ‘NEXT’ button to move on to the next setting.
** For detailed Network instructions, please refer to the enclosed TVIX-HD CD or the latest pdf file on
the TVIX-HD Homepage.
It allows you to connect to network easily with uPnP support, and it does not require an IP address. You can
immediately playback uPnP connected files (even full HD files) on wired/wireless network environment.
With Samba Server technology support, it can be used as a network storage device using a window explorer
for PC users, and it can also be used like a computer hard disk by specifying the shared folder between
users in the same network as a network drive.
With NFS, TVIX-HD can play high bit-rate files from a PC flawlessly over a LAN.
We recommend NFS connection over SAMBA. You need to install the TVIX-HD Netshare program (or other
NFS server) on the server PC, but the settings are much easier than in SAMBA mode.
You can download NetShare installer from our website to easily configure your NFS network.
To use the network with the Netshare, first please connect TVIX-HD into PC with USB cable to be
authenticated once.
Network Settings : Configure Wired network or Wireless network.
Setup Network Disk : This function searches and helps you find PCs connected to the network.
SAMBA: If you have a guest account, shared folder names can be listed and can be selected.
NFS: Connected PCs are listed automatically in NFS of NAS storage or Netshare.
In case of Netshare, if you select a tvixhd1 or tvixhd2, IP of PC is displayed.