User Guide DVI + Audio 1x4 Splitter / Repeater DVI-5314c
TABLE OF CONTENTS SECTION PAGE PRODUCT SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 PRODUCT LIABILITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.0 INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WARNING – Product Safety 1. Do not dismantle the product housing or modify the printed circuit board module as this may result in electrical shock or burn. 2. Do not attempt to service this product yourself as opening or removing the product housing may expose you to dangerous voltages or other hazards. Refer all servicing to qualified service personnel. 3. Keep this product away from liquids. Spills into the product housing may result in fire, electrical shock, or equipment damage.
1.0 INTRODUCTION The DVI-5314c is a high performance digital repeater with one (1) DVI input and four (4) independent, re-clocked DVI outputs. All inputs and outputs are HDMI v1.3 compatible, enabling full interoperability with both DVI and HDMI sources and displays. This unit accepts a single DVI or HDMI input signal, which is de-serialized, buffered and then applied to independent DVI / HDMI compatible transmitters at each output.
2.0 SPECIFICATIONS Model Number DVI-5314c General Specifications Compliance Maximum Pixel Clock Frequency Maximum Video Bit Rate Color Depth PC Resolutions HDTV Formats DVI + Audio 1x4 Splitter / Repeater DVI v1.0, HDMI v1.3 and HDCP 225 MHz 2.25 Gbps (single-link) 8-bit, 10-bit, or 12-bit Up to 1920x1200 and 1600x1200 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2048x1080 Dolby Digital, Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Digital Audio Support Audio (only with HDMI v1.
3.0 PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make certain the following items are contained in the shipping carton: • • • 1x DVI-5314c DVI + Audio 1x4 Splitter / Repeater 1x External AC Power Adapter 1x User Guide Note: Please retain the original packing material should the need ever arise to return the unit. If you find any items are missing, contact your reseller or DVIGear immediately.
4.2 Connecting the Power This product is shipped with an External AC Power Adapter that converts 100-240 VAC at 50/60Hz to +5 VDC with 2.6A output current. Connect the output cable from the AC Power Adapter to the locking receptacle on the rear panel. Take care to insert and then twist the connector a quarter turn in the clockwise direction. There is no power switch on these units. The units will turn ON as soon as the supplied AC Power Adapter is connected to a live AC power outlet. 4.
On the front of the unit there is an EDID selection switch. This switch controls what EDID information the splitter will report to the source device. The EDID information provided to the source can either be EDID from one of the connected displays (AUTO EDID Mode) or from an on-board memory chip that contains a library of the most commonly used resolutions (INT EDID Mode). These internally stored resolutions are listed in the table below.
information. In the event none of the outputs has an HDMI display connected, the splitter will use the EDID of the first DVI display that is connected as the “reference EDID” for the source device. The default factory setting for the EDID switch setting is AUTO. This setting works best for most applications. If one or more displays do not operate properly such that there is no image, or the image is too large or too small, then reset the EDID switch to the INT position.
6.0 TROUBLESHOOTING In the event of problems, first make certain that the input and output cables are connected securely and are of the highest quality possible. Note: Use of low quality cables can seriously degrade the performance of this product. To ensure optimal performance and maximum cable distance, use premium quality cables such as DVIGear’s Super High Resolution (SHR™) Series or equivalent. Next, check the Power LED to make certain that the splitter is receiving power.
7.0 LIMITED WARRANTY LIMITED WARRANTY – With the exceptions noted in the next paragraph, DVIGear, Inc. warrants to the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of three (3) years from the date of purchase. Should this product, in DVIGear’s opinion, prove defective within this warranty period, DVIGear, at its option, will repair or replace this product without charge.
Your Digital Connectivity Experts Toll Free 888.463.9927 Phone 770.421.6699 Fax 770.234.4207 DVIGear, Inc. 1059 Triad Court, Suite 8 Marietta, Georgia 30062-2258 www.dvigear.com DVI-5314c-UG-01 / March.