NDVR Server Manual NDVR system USER’S GUIDE Default username: admin password: 1 I
NDVR Server Manual Contents Chapter1 Start up and Main Interface .................... 12 1.1 Preparation & Un-installation ................................................... 12 1.1.1 Preparation ................................................................................... 12 1.1.2 Un-installation .............................................................................. 12 1.1.3 Search Tools .................................................................................. 12 1.
NDVR Server Manual 1.4.8 Matrix & display ............................................................................ 43 1.4.9 Sensors / Relays Control ................................................................ 44 Chapter2 Local setup .................................................... 46 2.1 System setup ............................................................................ 46 2.1.1 System setup ................................................................................. 47 2.1.
NDVR Server Manual 2.5 E-mail & SMS setup .................................................................. 63 2.5.1 EMAIL setup .................................................................................. 65 2.5.2 SMS setup ..................................................................................... 66 2.6 Digital matrix setup .................................................................. 67 2.6.1 Matrix setup ...........................................................................
NDVR Server Manual Chapter4 Playback ........................................................ 83 4.1 Main interface .......................................................................... 83 4.2 Playback ................................................................................... 84 4.2.1 Select date .................................................................................... 84 4.2.2 Select Record type ......................................................................... 85 4.2.
NDVR Server Manual 4.8 ACU Playback ............................................................................ 99 4.9 ICON Playback ........................................................................ 101 Chapter5 IE client ........................................................ 103 5.1 Functions of IE Client .............................................................. 103 5.2 Main interface ........................................................................ 103 5.2.1 Connection operations .
NDVR Server Manual 6.1 Recommended Mobile Phone Requirements ......................... 109 6.2 Download software ................................................................ 109 6.3 Install and connect ................................................................. 110 6.3.1 Installation .................................................................................. 110 6.3.2 Connection .................................................................................. 110 6.4 Login Interface.....
NDVR Server Manual Appendix D: How to use “Copy File” folder ............. 121 Appendix E: Dual Monitor .......................................... 122 Stretch Mode ............................................................................... 122 Setting Steps ........................................................................................ 122 Display and Operation ......................................................................... 124 Extend Mode ...........................................
NDVR Server Manual Introductions: Thank you for purchasing our NDVR System. The operation manual will introduce and explain each function of the NDVR System for better user experience and system stability. Users should read this manual thoroughly before installation.
NDVR Server Manual System features -Supports dual-monitor and multi-monitor in different work mode. -Supports multiple WTE series cards in a single system. -Supports multi-brand of mobile client. -Supports 32bit Windows OS. -Supports multi-brand of IP cameras, such as Mobotix, Sony, Acti, Arecontvision etc. -H.264 compression for better quality at lower transmission bitrate and storage requirement.
NDVR Server Manual Important Information For optimum system performance, it recommended to: 1) Please use Intel chipset motherboard and if using onboard video please use the Intel onboard video. If using external video card please use ATI Radeon video card. Contact tech support for the latest video card and motherboard support. 2) Divide the hard disk into two partitions (e.g.: C and D) and use the first partition for Windows OS and the second for video recording.
NDVR Server Manual Chapter1 Start up and Main Interface 1.1 Preparation & Un-installation 1.1.1 Preparation Before starting NDVR system, please be make sure to: 1. All connectors are firmly connected. 2. The NDVR properly seated. 3. The monitor resolution supports 1024*768 or higher. 1.1.2 Un-installation When changing version, always uninstall the older version. Click ―Start All programs HD NDVR server Uninstall HD NDVR‖ to uninstall HD NDVR. 1.1.
NDVR Server Manual Click Start All programs HD NDVR Server HC Series IPC Scan to scan HC series IP cameras connected in the LAN. Device type, IP address, Port number, Device Serial No., subnet mask, and mac address will be displayed in the search tool. Click Modify to edit the IP address and port.
NDVR Server Manual 1.2 Disk management After installing NDVR Server, assign space for recording otherwise software can’t record. Disk management will also run automatically after the NDVR Server installation. If Local Password is enabled, a proper user name and password is required to access Disk Management.
NDVR Server Manual 【Disk Drives】 : Display the disk and its format. 【Total Size (M) 】 : Display the total size of the disk. 【Free Space (M) 】: Display the total free space of the disk, which is the maximum space can be assigned for recording. 【Allotted Data Package】: Display the number of data package, which has been assigned for recording before. 【Residual Data Package】: Display the number of data package that can be assigned for recording.
NDVR Server Manual User can also select the number of data package for each disk in the drop-down list. After assigning the New Data Package, press button to create data package and index for recording. Note: 1) Please format the whole disk thoroughly before using it as a recording drive. 2) Each package for recording (Recdata****.mp4) is 256MB and it is associated with its index file (RecIndex****.inx). Both file must exist for the system to work or the user can’t playback recording data correctly.
NDVR Server Manual 6) After the data package created, user can’t delete the data package through disk manager, user just can delete them manually, and it is better to delete the whole folder ―_RECORD_DATA_‖ under each disk. After that, the space of the disk will be released; user can assign them for recording again. 1.3 Start up Double click shortcut icon to run HD NDVR Server.
NDVR Server Manual 1920*1080. When you want to run NDVR, the resolution should be set as 1024*768 at least. 1.4 Main Interface 1.4.1 Show tips 1. When the mouse moves closely or stops above a button, a text tip will be shown to interpret the function of it immediately. 2. Zoom in/out video image: Left-Double-Click a camera window to zoom in/out video image (or press F11 on the keyboard). 3.
NDVR Server Manual Besides, user can Double-Left-Click a selected window to enlarge it. You can restore it by the same way. You can also press F11 on the keyboard to do the same operations. 2. Instant playback Single-Right-Click desired camera window and select Instant playback (IP cameras included). After that, choose a time from the submenu, and then system will play back video data of current camera in current window according to your selection (E.g.
NDVR Server Manual previous frame. When the screen plays, you can press ↑and ↓to control the speed of playing, also, in play status you can press → and ← to play in normal speed and play it again. 3. Alarm popup Single-Right-Click video image area in main interface and select ―Start alarm popup‖ after you set ―Alarm camera popup interval‖ in system setup, otherwise, it can’t be selected with gray.
NDVR Server Manual OSD includes time and channel name. You can drag time or channel name to where you want directly in screen, then press save it or press button to button to resume time and channel name to default position. 6. IP Camera setup For this function, it is only available when you Right-single-Click image of IP camera. It will describe in IP Camera Setup. 7. Audio chat to IP Cam Press this tool bar, you can select the ―Audio Chat to IP Cam ―function to chat with the IP Cam as bellow: 8.
NDVR Server Manual If you want to display the normal image, you should single-right-click again and select IP Video Restore. 9.
NDVR Server Manual 1.4.3 Interface description 1. Partition mode Press button to set the window’s partition mode of the main screen. There are many types of partitions; the available partition is determined by the total channels of cards, you can select the suitable partition according to the number of video inputs. However, the partition mode is changing according to the size of the main interface. For example: When the size of the main interface is set as 1280*768, the partition mode will be changed.
NDVR Server Manual 2. Videos play in sequence mode switch Press button to switch among all cameras in current windows in sequence when current partition number is less than total channels .You can press again to cancel the switch. But at first, you must confirm that Camera Sequencing Interval in system setup has been set enable. 3. Emergency recording button Press button to trigger recording for selected window for 30 seconds even if they have been set to record by any other modes.
NDVR Server Manual 6. Information display panel This panel displays the current date, current time, disk usage and description of the selected camera. Note: Disk usage will be changed to record days when the record data package is full and the new data is overlaying the old. 7. Local setup submenu Press button to access Local setup. 8. Playback Press data. button to enter Playback to search local video/audio 9. System lock Press button to prevent unauthorized user to operate system.
NDVR Server Manual Default User ID is ―admin‖, no password. Note: If the NDVR system is not configured as User Manage Mode, the lock button will be unusable and allow any client’s access (even in client program, user name and password will be useless). 10. Exit program Press button to exit program. After click this button, a dialog will be displayed. Click ―OK‖ to quit NDVR system.
NDVR Server Manual 1.4.4 System Menu 1. Backup Configurations Select this function to export system configuration parameters. 2. Restore Configurations Select this function to import system configuration parameters. 3. Restore Default Parameters Select this function to restore the default parameters of system. 4. DVD/CD Disc backup directly Select this function to burn video data to DVD or CD, which is the same as burn DVD/CD in Playback. 5.
NDVR Server Manual Select this function to execute an external program. 6. Remote chat Select this option to connect a remote Client or Server for a live chatting via IP address, but please make sure audio card and Microphone have been installed. 7. Write to working log This is useful to record events that occur during the operator’s shift. 8. View system log Select this function to view all actions of recording as well as operations.
NDVR Server Manual 10. Open Screen Keyboard This function allow user to use soft keyboard. Also, in the setup interface, you can Left-Double-Click the blank to open soft keyboard. 11. Motion detection setup You can use the motion link PTZ preset function. Select Motion detection setup to set the motion detection area.
NDVR Server Manual First, you should select the ptz camera and set the preset. Then, you should select the detected camera, which is showed as . Next, select the detected area named Zone01 like the green frame. If you select the number is 64, the total of the zone is 64, you can detect the number of areas is 64. When the detected area motions, the ptz camera will link to the preset you set.
NDVR Server Manual By default, the entire screen is set as motion detection area where is indicated with green border around the image. To mask a specific area, you can click button to cancel the full screen detection border; then Left-Single-Click and drag a rectangle. A green rectangle will mark the area of it. Also, you can set any other areas.
NDVR Server Manual The motion value bar is used to set the minimum acreage of full screen to trigger alarm. Its unit is percent, if the acreage of motion area exceeds the setting value of the areas you selected, system will trigger alarm. The default value of Sensitivity and Motion is 2 and 5%. Note: Motion sensitivity value will affect the accuracy of smart search. (1). Add mask / Delete mask Press button to set the area to be shielded.
NDVR Server Manual If it is set to appear automatically, when the sensor is triggered, the map will appear automatically and the sensor being triggered will be marked. For triggered camera, user can Left-Double-Click it to view its video. 13. Play back to TV Monitor In NDVR system, the recording data of 40 series card and some IP cameras (except Mega IP cameras) can be transmitted to TV monitor via Matrix card. When system runs ―Playback to TV Monitor‖ process, the Matrix card will output recording data.
NDVR Server Manual 14. NDVR board work mode setup Each NDVR system supports maximum 8 PCs HC400X (total channel is equal to 64) series board, so user can set its work mode via this GUI. The new work mode of NDVR board will take effect after rebooting NDVR Server software. 15. Keyboard Shortcuts setup If you don’t want to use certain shortcut keys, you can disable the shortcut functions and save the setup.
NDVR Server Manual 16. Add/Del IP Camera Press this bar to add IP Module to NDVR system. For resource limitation, you can add max 64 IP Modules, including DVS and EM NDVR.
NDVR Server Manual (1). Add IP camera device Press button to add an IP Camera device: 【Server Name】Set a name for the new IP camera device for easy identify. 【IP Address】Input the address of the IP Camera, it is an IP address or IP alias of the IP camera which is connected through DNS Server. 【Connect Port】Set the port through which connects to IP Camera.
NDVR Server Manual 【If use DNS to get IP】Select whether use DNS to get IP or not, if the server end is the dynamic IP address, users need use DNS to get the server’s IP. 【DNS Server IP】Set IP address of DNS server host. 【DNS Server Port】DNS server host’s port, which is providing to connect DNS software.
NDVR Server Manual (3). Delete IP camera device Press button to delete connected server. When system is in processing to add IP camera device (―connecting…‖indicated in connect status column), user cannot delete that IP camera device. (4). Decode card work mode NDVR system supports playing video of IP Camera to TV wall directly, and then it uses the hard decoding function of decoder, so you should set the work mode of decoder.
NDVR Server Manual 1.4.6 PTZ Control panel In NDVR system, there are three ways to operate PTZ: 1. Panel operate; 2. Operate in video area directly; 3. Keyboards operate.
NDVR Server Manual 1. PTZ speed Press and drag the slider bar to adjust the speed of PTZ. 2. Relay (On/Off) Control the PTZ cameras internal relay (relay1) or the decoder’s relay (relay 1). Used to turn on a light or control an access gate. 3. Wiper (On/Off) If using the PTZ cameras corresponding wiper control relay, this toggles the relay/wiper on and off. 4. Zoom + / Zoom – Control the zoom function of the PTZ camera. 5.
NDVR Server Manual Overrides the auto-focus setup of the PTZ camera, adjust focus the image. 6. Iris + / Iris – Overrides the PTZ cameras auto-iris and brighten or darken the image. 7. Speed Dome Press button to operate the speed dome, including Preset Setup, Preset Call and Preset Tour: (1). Preset Setup In this screen you can set the preset position: I.
NDVR Server Manual can choose a group, and then set the track for this schedule; you can press / button to add/delete a preset to it. After you choose the preset name you can set the time to keep on. (2). Preset call When you select this function, system will show all the preset names you set in Preset Setup menu; you can click one to move to it. (3). Preset Tour When you select this function, system will show the entire tour groups you set in Preset Setup menu; you can click one to execute it.
NDVR Server Manual 8. Control PTZ via video window Press and drag the mouse to the corresponding area can control the PTZ when there is a decoder. 1.4.7 Color and Audio adjustment Press the button and drag to adjust the brightness of the image that you selected, and you can resume its default value by pressing. Press the button and drag it to adjust the contrast of the image that you selected and you can resume its default value by pressing.
NDVR Server Manual This panel includes matrix group and display group. Each group includes 16 numeric buttons; each button denotes one type of matrix or display. This will describe in Digital matrix setup. 1.4.9 Sensors / Relays Control 1. Sensor Control Press number button to check sensor all time forcibly even though user didn’t set check sensor in sensor setup. The channel of DI and DO is determined by the setup of DI/DO device you set in System setup.
NDVR Server Manual When there is no alarm triggered out, user can press the number button to output alarm forcibly and the button will show it with green, press it again the output will be closed.
NDVR Server Manual Chapter2 Local setup The NDVR System Configuration and include 7 types of configuration setup: System setup Camera setup Sensor setup PTZ & linkage setup Email & SMS setup Matrix & display setup User setup 2.
NDVR Server Manual 2.1.1 System setup 【Number of Channels】Display total channels of Local board card, the number of IP Camera is not included. For IP Camera, you should set it remotely in IP Camera setup. 【Sensor Input(DI)】Display number of sensors (DI). 【Sensor output(DO)】Display the number of alarms(DO). 【Audio Monitoring】Select real-time monitoring audio or not. 【Use E-Map】Select use Electron Map or not. 【Camera sequencing interval】Set auto-split changing interval time.
NDVR Server Manual 【Time Format】Select time format from the drop-list. After you change the format it will affect the OSD format, information in information display panel and file lists. 【Default Camera type】Set the default mode of video from PAL and NTSC, it is available when the input video is lost and for the decoder to playback local video to TV Wall. 【Grab picture save to】Select the path to save the captured pictures.
NDVR Server Manual auto display in the client software. But user must be sure that client is running on that IP address. Note: Alarm auto connection to IP is used to input alarm automatically. When sensor, normal or motion record is set to input and there is IP address, the system will check if the client has connected with this system. If there is no connection, the system will try to connect with it through Port 5300(preset).
NDVR Server Manual 1. If your NDVR is dynamic IP, you should set your NDVR system as follow: 2. DNS server will get domain name and current IP of your NDVR, NVR Client can connect NDVR server through this domain name. 3. NVR Clients get IP of NDVR through DNS server according to its domain.
NDVR Server Manual 4. NVR Clients visit NDVR through the IP that get from DNS server. 【Interval Connection Time】Set the interval time to connect DNS automatically. 【Permit Max Connect Video Num】The maximum number of video that permit to the client to connect the NDVR server. The number can select according to the network bandwidth. The maximum is 256. For example: one NDVR server own 2Mbit network bandwidth, if all video channel compress base on CIF resolution (max data bit rate is 500Kb).
NDVR Server Manual 2.2.1 Camera setup 【Selected Camera】To set the parameters for a camera, select the camera from the drop-down list. The cameras you can select are only the cameras of the local board card except for IP Cameras. For IP Camera, you should set it remotely in IP Camera setup. 【Camera Description】Input the description for easy identification.
NDVR Server Manual Click this button to make advanced setup for video quality, you can set I B P frame and maximum bit rate.
NDVR Server Manual Click this button, users can make advanced setup for video quality of client end, also can setup I B P frame and adjust maximum bit rate according to the network bandwidth. 【Image Size】Set the resolution for local record. There is an item ―704*576(12fps)‖, each channel can be set ―704*576‖, but not real time, system will select frame rate automatically around to 12-15fps。To get best effect, you should set the resolution of local record according to your CPU configuration.
NDVR Server Manual 【OSD Date】Select whether display the OSD date on the screen or not. When you select ―Not‖, the date will not display on the screen of corresponding channel. 【Masking Bitmap File】Watermark function ,the logo picture must be edited ad 128*128 pixels file size and saved as bmp format. 【Record Days】This section allows users to determine how long the record data of each camera should be kept in the system. The maximum duration for on-line storage is 120 days.
NDVR Server Manual the background. You can change its position or color when this happens; 4) Image size is the format used when recording. Remote image size is the format used when these images are transmitted to client sides; 5) Remote Frame Rate, Remote image size and Remote Quality are the parameters of the client side. ①When the server’s image size is set as ―704*576(12fps)‖, the three items are no effect, and client’s parameters will be the same with server.
NDVR Server Manual 【Pre-Event Record】Select the start time of record when there is an alarm. When NDVR system is in Motion Detect mode or Sensor Detect mode, it can record video before the alarm is trigged. 【Post Record Time】Select the end time of record when there is an alarm. When the system is in Motion Detect mode or Sensor Detect mode, it can record video after the alarm end.
NDVR Server Manual 4. Motion or Sensor Record (yellow): Combine with above 2 and 3 function (e.g. Wednesday); 5. Normal & Motion Record (light blue): NDVR system records in motion detection record when it detects moving object and in normal record when there is no motion (e.g. Thursday); 6. Not Record (gray): NDVR System records no video (e.g. Friday and Saturday). 2.3 Sensor setup 2.3.1 Sensor setup 【Select Sensor】Select the sensor from the drop-down list in order to set the parameters for it.
NDVR Server Manual 【Activate PTZ Preset】Select linkage of Speed Dome preset number . Speed Dome will move to this preset number automatically when there is an alarm. (Speed Dome installation needed). 【Play Alarm sound】Select a sound of .wav for a sensor, if there is an alarm, the sound file will play. 【Link to PTZ】Select camera that is related to this sensor alarm. 2.3.2 Group setup Sensor group setup is very similar to the group setup of camera recording. 【Selected Group】Select group number.
NDVR Server Manual Check Alarm (Red): NDVR System responds with sensor during this time (00:30 to 12:00 from Sun. to Sat.); Not Check (gray): NDVR System doesn’t respond with sensor during this time. Note: If you set a camera in several groups, only the last setup is available. 2.4 PTZ & Linkage setup 2.4.1 PTZ protocol setup 【Selected Camera】Select the camera from the drop-down list to be set the parameters.
NDVR Server Manual Cameras are not included. For IP Camera, you should set it remotely in IP Camera setup. 【PTZ Port】Select PTZ connecting port, when you do not use PTZ port, please choose ―------‖. 【NDVR Keyboard COM Port】Select a connecting port for NDVR keyboard. If you have chosen COM1 for DI/DO Port, and you choose COM1 again for NDVR keyboard, then, DI/DO Port will be changed to another port. If you want to know more details for NDVR keyboard, please refer to NDVR/NVR Keyboard Control Manual.
NDVR Server Manual 【Send Alarm to client】Select sending alarm to network clients or not. button to selects a ―.wav‖ sound File 【Motion Alarm Sound 】 Press for a motion alarm. If there is a motion alarm, the sound file will be played. Also, you can test it by pressing button. 【Send email】Set the send email alarm function disable or enable when the cameras test abnormally. 【Send sms】Set the send sms alarm function disable or enable when the cameras test abnormally.
NDVR Server Manual Check Alarm Setup (including Motion & Video Loss, Motion Alarm and Video Loss) does not take affection to Motion Detection Record. It is only alarm setup. It takes affection to motion detect alarm out and motion detect alarm to network. 2.5 E-mail & SMS setup Press button to access E-Mail setup.
NDVR Server Manual User can modify GSM modem's communicate parameters manually in C:\Program Files\NDVR Server\SMS_LIB as bellow: After you insert the GSM MODEM, Firstly, you should install the driver.
NDVR Server Manual 2.5.1 EMAIL setup 【SMTP Server】SMTP server address, e.g.: mail.jstDVR.com, 【SMTP Port】SMTP listen TCP’s port for connect request. 【Auth. Type】Logon mailbox, operator will select SMTP authentic type. Or select ―simple login‖. 【Login User ID】Mailbox’s ID. 【Login Pass】Mailbox’s password. After finished setup, user can press can be sent successfully. 【Send To】Set address of receiver.
NDVR Server Manual 【Copy To】Set another address of receiver to whom system sends E-mail. 【Sender Email】Enter email address of sender. 【Email Title】Enter title of the E-Mail to be sent. 【Email Screenshot As Attachment】When alarm be triggered, the system will grab a picture, you can choose whether send the picture as attachment to the E-mail. 2.5.2 SMS setup 【SMS Device】Set the sms send mode, you can select the SMS pdu mode or the sms text mode.
NDVR Server Manual 2.6 Digital matrix setup 2.6.1 Matrix setup 【Matrix Group】System operator can set a groups of video images to be sent out through matrix decode card, each group has different display mode. Up to 16 groups you can set. 【Video Out Port】Select the output port of Matrix card that you want to set, the total number of channels is decided by Matrix Decoder card. 【Video Out Standard】Set Matrix video out standard, you can select from PAL and NTSC.
NDVR Server Manual channels of them is not influenced by decoding channel. For IP cameras, system use hard decoding, total channels of them are influenced by decoding channels. For different work mode, the channels you can used are different, the available certain channels must be the first certain channels. If you disable hard decoding, you can’t output real-time video of IP camera to TV Wall. Note: One camera is only showed in one window once.
NDVR Server Manual 2.7 Password setup 2.7.1 User information 【Local Password】Select ―Enable‖ to enable User Manage mode for local PC NDVR, and activate the lock button in main window. Only authorized user can log into the System at User Manage Mode. 【Auto lock time】Select a time to enable system to lock automatically when there have no actions after this time. 【Network Password】Select ―Enable‖ to enable User Manage mode for Client.
NDVR Server Manual 【Password Confirm】Confirm password again. 【Note】Input your description of this user. 【New User】Press button to edit the user you want to add in the 【User Name】Blank. Input User Name, Note Name, Password, and Confirm Password. Select Manage Right (Administrator or Operator), and then click Add User to save. 【Add User】Up to15 users can be added to system except Admin. Click icon to add new user you edited to user list.
NDVR Server Manual 【User Access Right】Select operational tasks, granting or denying rights. Operational tasks are normally reserved for administrative, privileged accounts. Operators are rarely granted rights to adjust camera color, exit program, explore files etc. When manager doesn’t want some operators to manage disk or backup data locally, he should not check the two rights for those users.
NDVR Server Manual Chapter3 IP Camera Setup Note: For IP camera setup, its alarm and related setup is only available when you set remotely, the local setup of PC NDVR is not available for IP Cameras except Recording Schedule in Camera Setup. The remote setup interface of NV Series IP cameras is as below: For DG Series EM-NDVR, the interfaces are not exactly the same as NV Series. Remote setup for DG Series EM-NDVR includes Server, Channel, Record, PTZ, Sensor, Alarm and User.
NDVR Server Manual The system can upgrade to the server remote. Click this button, and select the right file. Some settings will only come into effect after device reboots. Adjust date and time of DVS or EMDVR. The new date and time will accordant with NVR client computer. After setup is finished, click this button to save the setup. Exit setup. Remote setup for DVS includes Server, Channel, PTZ, Sensor and Alarm. 3.
NDVR Server Manual 【Server Name】Enter the name description for easy identification. This name delegates the foreside server. If use DNS to get IP, this name will be used. 【IP configuration and related】 【Server IP】 【Port】 These are network configuration; you can set LAN or Internet IP according to your need.
NDVR Server Manual This section contains the parameters to designate a name for every camera connected, to enable or disable show LOGO and OSD, and to set display type of OSD & LOGO as well as record resolution, record type, record quality and frame rate, etc. 【Camera】Select the camera to be set from the drop- list. 【Camera Name】Enter a name description for easy identification. 【Frame Rate】Select the record rate of camera from drop-list.
NDVR Server Manual 【Max Bit Rate】Select the maximum bit rate for Variable Bit Rate (VBR) record. 【Show LOGO/ OSD/ Week】If you check those boxes, system will show corresponding information on screen. 【Position】Set the position of OSD or Logo by entering the X and Y coordinate directly. 【OSD】Set the display attribute of the OSD & LOGO. There are four types of display modes: Clarity-Glitter, Clarity-Not Glitter, Not Clarity-Glitter and Not Clarity-Not Glitter. 【OSD Type】Select the type of OSD for the Week.
NDVR Server Manual , Set the time to post or pre the record. 3.4 PTZ control Press button to set PTZ. In this screen, you can define the PTZ protocol and set the Preset Position as well as the plan to execute them automatically. 【Camera】Select the camera to be set from the drop- list. 【Baud rate】Set baud rate according to PTZ protocol from the drop- list. 【PTZ Protocol】Select the communication protocol for the PTZ camera from drop-list.
NDVR Server Manual 【PTZ Address】Set the address of the decoder, which must be matched with the value of dipswitch in the PTZ. 【Speed】Set the speed of the PTZ. 【Preset position & schedule setup】Define preset position and set time to call preset position automatically. System can add and delete plan time. 【Name】 Set the name for the current preset. 【Preset】 Set the preset number for the current camera configuration. Add the preset by current Delete the finished Preset.
NDVR Server Manual 【Preset】 it can add the preset into the Preset Schedule, the preset set completed in the Auto Pre yet. 【Call Time】【Schedule List】Set the time of the preset should be call at that time. Tour Group Add the Preset cameras into the Tour Group and set the Stay Time for one tour group. 3.5 Sensor setup Press button to set sensor parameters.
NDVR Server Manual 【Sensor NO】Select one sensor to be set. 【Sensor Name】Enter the name description of the sensor. 【Type】Select alarm type (sensor type) from ―NO‖(Normally Open) or ―NC‖(Normally Close). 【Policy】Selecting ―Sensor Alarm Handling‖ firstly, handling policies will be available as follows: On screen warning—Display the alarm information on the monitor. Audio warning—Indicate the alarm with voice. Upload to center—Update the alarm information to center.
NDVR Server Manual 3.6 Alarm setup Press button to set alarm parameters. 【Camera】Select a camera to be set from the drop-list and you can copy the configuration to the other cameras by clicking copy button. 【Alarm Type】Select alarm type: Motion detection, Tampering alarm and Video Loss. 【Level】Select sensibility levels from 0 (the lowest level) to 5 (the highest level) for the alarm.
NDVR Server Manual will be triggered to record (the record type of the channel is Alarm Record), and the monitor will switch to preview the cameras (warning on monitor is enable). 【Schedule】Set alarm input precaution time. Select date firstly, then set time segment according to the sequence. The time of each segment should not overlap the others and no skips are allowed. After the precaution time of a certain day is set, you can copy the parameter to other dates by select a day and press copy button.
NDVR Server Manual Chapter4 Playback 4.1 Main interface Click button in main interface to enter playback interface. Press this button , the select camera will reverse playback, and press it again, the reverse playback will stop.
NDVR Server Manual 4.2 Playback 4.2.1 Select date Select one window (the 1st one in default), and then click button to show the date. The red dates contain recorded data. The green date is the current date. The gray dates signify no data. Only those blue ones can be selected and when they are selected the camera window will appear automatically to show which cameras has record data.
NDVR Server Manual Click or to change month and year of search data. You should select the date first; otherwise, you can’t entry the all sub-playback interface. The date can’t be selected in the sub-playback interface. 4.2.2 Select Record type Press the icon before ―Motion‖ when you want to playback motion recording. Others are the same. When there is no record data of the selected record type, the below picture will be shown. 4.2.
NDVR Server Manual 2. Smart search (1). Function introduction: This function allows users to draw a zone on a video image and do a search for any motions, missing objects, or unattended object events occurred in that zone. It can help you find recorded video you are interested in. Note: Smart Search accuracy is decided by sensitivity value and threshold in Motion Setup. (2).
NDVR Server Manual When you press the smart button, you should select the area percent by single clicking the right mouse, if the motion percent of the area above the select percent, it will be shown out. Note: Press synchronic button while smart search is running, system will end smart search; The sensitivity of the smart search is same as motion detection. If you set a very low sensitivity, system will search even that there is no motion in the specified area.
NDVR Server Manual After selecting the camera to play user can click button to show all the files of this camera. By default, system will play back video file from the first one. In this screen you can select the file you want to play by clicking it directly. The camera list below the window shows the recorded data of the day you selected. Double click any time with record data, a red mark will be there.
NDVR Server Manual When there are too much record data, you can use to select. Press or button to see the recorded data of other cameras, The red bar means the exact time when system is playing back now. 4.3 Play file and related operations Press this button to set partition mode of Window, there are 1，4 ，9and 16 splits. To reduce the load of CPU and get best effect, you should select the partition mode according to the record channels amount and resolution.
NDVR Server Manual CIF 9 DCIF 9 CIF 16 4CIF 4 DCIF 9 CIF 16 24 Less or Equal to16 Press button to open all playback windows in sequence according to the order of the cameras. Press button to close all playback windows. Previous / Next Minute: press this two buttons to look previous or next minute. Next frame: press this button continuously to play video next frame, the speed is determined by the following playing speed adjustment bar.
NDVR Server Manual Note: It is not suggested that multi-channel (more than 10 channels) record or playback simultaneously unless your PC has an advanced configuration, because the data throughput of HDD might be too high. Multi-channel search in client and server are the same except their paths. In client, they are in local; in remote search, it searches among the record data in server in the local network. 4.4 Capture picture Click capture button to capture a still picture.
NDVR Server Manual 4.5.1 Create file clip Press to create file clip after you entered Backup. 【Select channel and save path】Select channel and save path of the backup file on the top of interface. 【File list and attribute】Select a file and double-click it to play and its attribute will display below the list , including begin time, end time, file size, resolution, frame rate etc.
NDVR Server Manual 【Play control button】User can press and drag slider on to control the player time. 【Beginning and stop position setup】After you select a time, press button to set it as the beginning time, and then drag the bar to select another time and press button to set it as the end time. When you finished, the file attribute on the left will show the size of the file to be created.
NDVR Server Manual 【Select begin time】【Select end time】Select the beginning time and end time of the file to backup. It can backup the data feature and remove file unite function when backup, so that backup procedure is faster. You can check the file’s value by pressing button to show its total value. 【Backup Date Size】 Show the size of the backup file. If user backup recording file to CD directly, the date size should not more than 650M.
NDVR Server Manual : Copy the file player in the Save path. 4.5.4 Burn video file to DVD/CD : Add selected file. : Delete selected file. 【Burn CD drive】Select CD-ROM driver. 【Volume label】Set the CD’s label. 【Total file size】Show the size of all files will be burned to CD. When you finish your setup, click this button to write file to CD or DVD. Clean up the data of CD/DVD. Open the CD-ROM. Close the CD-ROM.
NDVR Server Manual It supports DVD or CD disc backup directly, max support 4.3G DVD disc and user can erase DVD-RW disc and write again, all work needn't install third burning software. 4.6 Search captured picture Click to enter the search captured picture window: 【Select pictures from directory and file list】You can select a captured picture from directory list and file list in local disk and the file name will show in the top of the window.
NDVR Server Manual Note: If you want to save the reworked picture in another file, you can change its name and path here, with BMP or JPG as suffix. Then click the button . 【Related operations】 Save the reworked picture. Functional buttons of picture disposal. When the result of disposal is not good click it to the default. Print picture, when the image is wider than 400 pixels, it will be printed smaller. On the other hand, it will be printed bigger.
NDVR Server Manual 4.7 POS Playback Press the button ; you will see the interface as below: Show Txt: show the txt on the screen (if you checked ―Text OSD to NDVR board‖ in the Cam setup, the show txt would be invalid). 【Data】: Select the search data. 【Camera】: Select the search camera. 【TXT Filter】: Search the content including the word. E.g.
NDVR Server Manual The word of the TXT Filter is THANK, then, press the Search, the content display all the Pos messages with the ―THANK‖. From ... To: Select the begin time and the end time. Press this button to search the record for the setting setup. Press these button to back or next the display page. 4.
NDVR Server Manual Show Txt: show the txt on the screen, (if you select txt overlay in the Cam setup, the show txt is invalid. 【Data】:Select the search data. 【Camera】: Select the search camera. 【From... To:】Select the begin time and the end time. Press this button to search the record for the setting setup. User Name: Search the ACU record with the name input in the blanks. E.g.
NDVR Server Manual Input ―D’One‖ in the User Name, then press search, the content will display all the ACU messages with the user name ―D’One‖. 4.
NDVR Server Manual Select the cameras. Set the begin time and the end time of the record, set the time of the one view plays. E.g.: as the above image, the time from 9:45 to 12:00, it include 135 minutes between the begin time and the end time, the screen is 4 views, the first view show the 0-10 minutes’ record, the second view show the 10-20 minutes’ record, .., when the 4 views plays end, it will play the second 40 minutes until the 135 minutes all end.
NDVR Server Manual Chapter5 IE client The client user can view video of NDVR Server through Internet Explorer, The default web server port is 80; if user changes it to other port, user should add this port number after domain name when visit the video of Server through Internet Explorer. E.g.: http://192.168.0.119:1280. 5.1 Functions of IE Client 1. Video display and video storage; 2. Audio input; 3. Searching and playback video image locally or remotely; 4. Control PTZ and speed demo remotely. 5.
NDVR Server Manual 5.2.1 Connection operations Press will connect the NDVR Server’s camera video from and press will disconnect all connections. Select the Main Stream or Sub Stream for current cameras Server’s channel is more than channels that you selected partition mode, you can use button button to display NDVR Server’s video in sequence. Pressing will switch full screen mode and Right-Single-Click image can back to normal mode. 5.2.
NDVR Server Manual ——10partition mode; ——16partition mode. 5.2.4 PTZ Control Most functions of PTZ control are same as PTZ Control panel in NDVR Server. 5.2.5 Quit program Press button to shut down the IE Client. 5.
NDVR Server Manual 5.3.1 Display setup and data information In this area, you can select display partition mode, date, video channel and its video file named according to time. 5.3.2 Playing operation area In this area, you can operate video playing: 【Video-playing time adjustment】Press and drag slider bar to adjust video-playing time 【Information display panel】Display current window name, camera name and record data information.
NDVR Server Manual When you playback remotely, you click button to save video of current channel you selected. After finishing it, system will inform the save path. 5.4.1 Fast download record data In the playback mode, select one camera that has record data, open file list panel, select one record data file, and click selected data file will download fast.
NDVR Server Manual When user use IE client to visit NDVR server, If connect successfully, there will be four partitions blue window. If connect unsuccessfully, the reasons possibly are: 1) The Web server port has been used by other programs; 2) Your computer didn’t download the player plug normally. The reason may be the jurisdiction of your computer is too high, or your computer has plug filter.
NDVR Server Manual Chapter6 Mobile Client Mobile clients in our software now support different kinds of mobile phones, such as Nokia, BlackBerry and Iphone, etc. You can view any cameras, including board card cameras and IP cameras supported by our software, even megapixel cameras. And you don’t have to set dual-stream now. 6.1 Recommended Mobile Phone Requirements 1.
NDVR Server Manual 3. Download mobile client software through OTA (in WAN), it will describe as follow: Enter ―http://IP:PORT/ MobileDvr.jar (and another is MobileDvr.jad)‖ in the address bar of the mobile telephone internet explorer to download the setup package of the Mobile Client. Note: IP: the IP address of the NDVR server. PORT: the Port of the IE client of the NDVR server. When you download mobile client software on WAN, you must be sure that your mobile phone connect with Internet correctly.
NDVR Server Manual After you installed mobile client in your smart phone, you should be sure that your smart phone connect with Internet correctly. Currently, mobile providers support WAP and WEB access point, mobile client must use Internet as access point (AP) to access NDVR Server remotely. 6.4 Login Interface After you downloaded and installed the MobileDvr software, you can run it on your mobile phone to enter the login interface. 【Addr】Fill the IP address or domain name of the NDVR server.
NDVR Server Manual 6.6 PTZ control Press the ―Options‖ button and select the ―PTZ‖ button to enter the PTZ control interface. 【Orientation control】: Select the change into button and press “OK,”it will . After that, by pressing and holding the up, down, right and left buttons, the PTZ camera will move up, down, right and left. 【Zoom + / Zoom -】: Control the zoom function of the PTZ camera. 【Focus+/ Focus -】: Overrides the auto-focus setup of the PTZ camera, adjust focus the image.
NDVR Server Manual Appendix A: Fast key reference Please refer to shortcuts keyboard setup This color key denotes PTZ control. This color key is other function control.
NDVR Server Manual Right(in the status of preview for PTZ control) Play next frame(in the status of instant playback) → Play in normal speed(in play condition of review playback) Play next frame((in pause condition of review playback) Home Zoom- End Zoom+ Insert Focus- Delete Focus+ C、—、 Num0-9G Presets Control Operation Call preset 、Enter C、—、 Num0-9 Presets Control Operation Other controls: Key Function F1 System Help Tab Switch the camera channel Page Down Next screen Page UP Prev
NDVR Server Manual F11 Zoom in/out the single camera view Switch to Full screen mode (Equivalent to pressing F12 space key except Instant Playback mode) Ctrl + 0 Enter playback Ctrl + 1-9 Instant playback minutes Shift + 1-8 Select screen partition 1,4,9,16,25,36,49,64 WIN+ Z Minimize the Main System window 115
NDVR Server Manual Appendix B: Audio preview First, connect the card use the cable, as follows: Note: Sometimes there is no preview sound, Solution: double click the volume control of in the taskbar, open the properties dialog box, and check AUX control.
NDVR Server Manual Appendix C: Driver Installation Manual This manual is mainly talking about how to install drivers when there are WTE series cards in the same PC. WTE cards can be mix and match 4 channel can go with 8 channel to get a 12 channel system Insert Cards When you enter Device Manager, you may see the following interface. Check whether the drivers are correct From the above picture you can see there is no W card driver installed and there is an exclamation mark in front of one of the drivers.
NDVR Server Manual There is ―PCI Slot X‖ displayed here so that you can locate different drivers according to the serial-number of slot. Update the wrong drivers Now we have to update the wrong drivers. When there is an exclamation mark in front of the driver name, single-right-click on the name and select ―Update Drive‖. Then, follow the prompt to complete the operation.
NDVR Server Manual When the driver is installed incorrectly, you should uninstall it first. Then, single-right-click and select ―Scan for hardware changes‖ to install the new driver manually. Sometimes, it will ask you for the location of your drivers. You should locate where the drivers are and select the right path to install the correct drivers.
NDVR Server Manual There is no ―PCI Slot X‖ displayed here so that you can’t locate different drivers according to the serial-number of slot. As shown in the below picture, Note: When all the installations are done, insert the cards in the previous slots when the drivers are being installed. For example, WTE-RTSH is installed in the first slot when you are installing its driver. So when it is taken out and inserted back again, it should be in the first slot too.
NDVR Server Manual Appendix D: How to use “Copy File” folder In installation CD, there is a file named ―Copy File‖. If you want to replace some files in installation directory, you can copy new files into ―Copy File‖, when you finished the installation, the new files will replaced the old files. If you want to replace some files in sub directory of installation directory, you can create the same directory in ―Copy File‖ folder with the installation directory.
NDVR Server Manual Appendix E: Dual Monitor Many customers are favor of dual monitor function for they can view clearer videos on the second monitor while operate on the main monitor without any barrier. Now there are two work modes you can select to start dual monitor function: Stretch and Extend. We support multi-monitor in Extend mode actually.
NDVR Server Manual When it’s done, the following interface will be displayed.
NDVR Server Manual The desktop area should be selected as 2048x768 while the original resolution of each monitor is 1024x768. Note: If the old ATI display card doesn’t support ‖CATALYST Control Center‖, you should download ATI Catalyst and install it. Then you can enter the setting interface in ATI catalyst control center. Now all the settings are done, you don’t have to do other settings in the NDVR. Once NDVR runs, dual monitor function is effective.
NDVR Server Manual Also, when you double click one window to zoom in it, other cameras will be displayed on the second monitor. When all the cameras are shown on the main monitor, no camera will be displayed on the second one. Operation You can single–right-click on both main monitor and second monitor to do full screen display, instant playback, OSD adjustment, send to TV monitor and read IP register information. The operations are the same with single monitor.
NDVR Server Manual When you are in the playback interface, all the cameras will be displayed on the second monitor automatically. Operation You can also do the operations as in the preview mode. Please refer to Preview for details.
NDVR Server Manual Enter Setup Display When you are in the system setup interface, all the cameras will be displayed on the second monitor automatically too.
NDVR Server Manual No operation is available. The setup interface will be always in front of all the other windows. So, every time you single-right-click on the second monitor to popup the menu, the setup interface will hide it again and again. Extend Mode Setting Steps Also, take ATI HD 2400 series display card as an example. First of all, connect two monitors to the display card. Extend Main onto Monitor The system can detect another monitor automatically when it is connected.
NDVR Server Manual You don’t have to set Desktop area again. Settings in NDVR When all the settings are done, run NDVR and then single-right-click on the main screen to enter Dual Monitor Setup. If the second monitor is not connected or set correctly, the option will not be displayed.
NDVR Server Manual It is named as PC Decoder Setup because when there is a TV client on line and the NDVR IP is filled as the sever IP, the NDVR can detect it automatically and display the TV client IP in the TV Client List. Here the IP ―192.168.0.238‖ is the TV client IP.
NDVR Server Manual Double click the monitor name in the Active Monitor List or single click Setup button while a monitor is selected to enter Monitor Setup interface.
NDVR Server Manual The operations are nearly the same with the operations in PC-Decoder. The only difference is you can’t set more than one groups here. For more details about the operations, please refer to PC-Decoder manual. Display and Operation When all the settings are done, save and exit the setup.
NDVR Server Manual Note: The same with TV client of PC-Decoder, the number of partitions can be displayed on the second monitor is 16. Also, you can loop several cameras in one window. In other word, you can view as many as 16 cameras at the same time on the second monitor. You can’t do any operations on the second monitor or any monitors of the TV clients. They are only used to view.
NDVR Server Manual Appendix G: Sony Camera Setup 【Date Time Format】Select a suitable date time format from the drop-down list. 【MPG4 Frame Rate】Select the frame rate of the image. Selectable values are as follows: 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25 and 30fps. 【MPG4 Bit Rate】Select a suitable bit rate for camera from the drop-down list. Selectable values are as follows: 64, 128, 256, 384, 512, 768, 1024, 1536 and 2048kbps.
NDVR Server Manual 【Sharpness】Select the sharpness in 7 steps, from -3 to +3. Selecting +3 provides the image with the highest sharpness. 【Contrast】Select the contrast in 7 steps, from -3 to +3. Selecting +3 provides the image with the highest contrast. 【Custom Template】When you select a custom template, Exposure compensation, Backlight compensation and Gamma setting are set optimally depending on shooting conditions. 【White Balance】Select the white balance mode.
NDVR Server Manual 【Backlight Compen.】Select the backlight compensation. You can select from Normal, Spot and Off. Normal: The camera judges the backlight situations on the whole image. If the image is under backlight situation, the camera compensates the exposure automatically for a brighter image. Spot: The camera judges the backlight situations in the center of the image. If the image is under backlight situation, the camera compensates the exposure automatically for a brighter image.
NDVR Server Manual 【Hold Time】Select 2 sec. or 30 sec. for the response time to switch to the brightness level. 【Status】Shows the current status of Light funnel function. 【Alarm Output NO.】The alarm output menu consists of two tabs: Alarm Out 1 and Alarm Out 2. 【Alarm Output Switch】Select whether alarm output or not. 【Alarm Output】Select the mode of the alarm output function. Alarm: Controls alarm output synchronizing it with an external sensor input or the built-in motion detection function.
NDVR Server Manual 【Voice Alert Repeat】Select playback repeat time from 1 to 3. 【Image Memory】To use the image memory function, select On. 【Built-in Memory】The current memory space of the built-in memory is displayed. 【Over Write】Select On to overwrite the file or not when there is insufficient memory space to record the image in the built-in memory. On: Overwrite is enabled and old files will be overwritten in the order of date. Off: Overwrite is prohibited. No recording will be performed.
NDVR Server Manual 【Periodical Recording】Select On when you want to use periodical recording. 【Periodical Mode】Select the periodical recording mode. Periodical mode: An image file is recorded periodically according to the specified Interval and Effective period. Tour mode: An image file is recorded when the camera is moved to each preset position during the tour. Note: You cannot record files in Tour mode while PTZ on motion detection is performed.
