Software Owner manual

NDVR Server Manual
104
5.2.1 Connection operations
Press will connect the NDVR Server’s camera video from
and press will disconnect all connections.
Select the Main Stream or Sub Stream for current cameras
Server’s channel is more than channels that you selected partition mode, you
can use button to display NDVR Server’s video in sequence. Pressing
button will switch full screen mode and Right-Single-Click image can
back to normal mode.
5.2.2 Connection/Record status
This icon indicates the current connection and their record status:
Gray: Not connected;
Navy blue: Connected with no recording;
Green: Connected with recording.
You can change the record status by pressing corresponding number
button or change status of all connections at the same time by pressing
button.
5.2.3 Partition mode
You can set the partition mode by pressing corresponding button on the
right of main interface. It has the following partition modes:
——1partition mode; ——4partition mode;
——6partition mode; —9partition mode;