Software Owner manual

NDVR Server Manual
137
【Hold Time】Select 2 sec. or 30 sec. for the response time to switch to
the brightness level.
【Status】Shows the current status of Light funnel function.
【Alarm Output NO.】The alarm output menu consists of two tabs: Alarm
Out 1 and Alarm Out 2.
【Alarm Output Switch】Select whether alarm output or not.
【Alarm Output】Select the mode of the alarm output function.
Alarm: Controls alarm output synchronizing it with an external sensor
input or the built-in motion detection function. When Alarm is selected, the
items Sensor input, Motion detection, Alarm duration and Effective period
become active.
Timer: Controls alarm output using the timer.
【Sensor Input】Select this option when you link the alarm output to an
external sensor that is connected to sensor input of the camera I/O port.
【Motion Detection】Select this option when you link the alarm output to
the motion detection function.
【Alarm Duration】Select the duration for which the alarm output is short
circuited between 1 and 60 sec.
【Effective Period】This item becomes active when Mode is set to Alarm.
Set the period during which the alarm detection is effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period during which alarm detection is
effective. Click Schedule and the menu for the effective period is displayed.
Trigger Alarm Output
【Trigger Alarm】Select the alarm output control mode from Toggle or
Timer.
Toggle: Switch between On (short circuit) or Off (open).
Timer：By default, the alarm output is switched to On (short circuit), and
will automatically switched to Off (open) after the time specified in Duration
has elapsed.
【Voice Alert NO.】The Voice alert menu consists of 3 tabs: Voice alert
1, Voice alert 2 and Voice alert 3. You can configure an individual audio file
on each tab.
【Voice Alert Switch】To use the voice alert function linked with the
sensor input or the motion detection function, select On.