Software Owner manual

NDVR Server Manual

previous frame. When the screen plays, you can press ↑and ↓to control the

speed of playing, also, in play status you can press → and ← to play in

normal speed and play it again.

3. Alarm popup

Single-Right-Click video image area in main interface and select ―Start

alarm popup‖ after you set ―Alarm camera popup interval‖ in system setup,

otherwise, it can’t be selected with gray. After that when there is a motion

detection alarm (set in PTZ & Linkage setup and Motion detection setup) or an

alarm triggered by sensor (set in Sensor setup), system will display alarm

cameras in sequence. When you want to end this function, you can

Single-Right-Click video image area and select ―Pause alarm popup‖.

4. Auto Tracking for PTZ

This function is only available to intelligence PTZ.

5. OSD Adjustment

Single-Right-Click video image area in main interface and select ―OSD

Adjustment‖ to adjust the position of OSD (IP Camera does not have this

function; you can set the OSD position in IP Camera setup remotely).