Software Owner manual

NDVR Server Manual

The motion value bar is used to set the minimum acreage of full screen to

trigger alarm. Its unit is percent, if the acreage of motion area exceeds the

setting value of the areas you selected, system will trigger alarm. The default

value of Sensitivity and Motion is 2 and 5%.

Note:

Motion sensitivity value will affect the accuracy of smart search.

(1). Add mask / Delete mask

Press button to set the area to be shielded. If there are some

areas that you don’t want to show, you can draw those areas with mouse till

they change to be black. You can set several cover areas. Press this button

again to finish adding.

Press button to delete all cover areas.

12. Open electron map

Click icon and then Right-Single-Click on the map, the

setting picture will appear. You can add or delete sensors and cameras that

pointed by the arrow or change the digital map.