Software Owner manual

NDVR Server Manual

2.1.1 System setup

【Number of Channels】Display total channels of Local board card, the

number of IP Camera is not included. For IP Camera, you should set it

remotely in IP Camera setup.

【Sensor Input(DI)】Display number of sensors (DI).

【Sensor output(DO)】Display the number of alarms(DO).

【Audio Monitoring】Select real-time monitoring audio or not.

【Use E-Map】Select use Electron Map or not.

【Camera sequencing interval】Set auto-split changing interval time.

【DI/DO Port】Select sensor/alarm driver connecting port, it must be

different from PTZ Port. If you do not use alarm input, you can close this

function. To avoid conflicts to the PTZ port, you should set and use the

different ports for these two functions.

【Keyboard Shield】System keystroke. When it is enable, functions of

some system keys will be disabled.

【Save Log for() Days】Log save days(max 100 days).

【POS Function】Set the pos function disable or not.

【ACU Function】Set the ACU function disable or not.

【Alarm camera popup interval】Set the interval of alarm camera, if you

select“—”,you can’t select function Start alarm popup.

【DI/DO Device】Select receive alarm device type. When you change the

type of alarm device, you should reboot the system to update the device

information in DI/DO control panel.

Note:

Currently, system supports following WV serials DI/DO devices: WV7608,

WV7609, WV7616, WV7616B, WV7632 and WV7632B. WV7632 includes two

WV7616 (or combination of WV7608 and WV7616), and WV7632B includes

two WV7616B. When you select these two selections you must set their

decoder address as 1 and 2, and they should connect with PC through RS 485

converter after they connect parallel with each other.

【Date Format】Select the way to display date. It decides the date display

mode of NDVR system, including the information panel on the main screen,

the date panel of the playback window and OSD date in video.

【Alarm Beep】Select disable or enable from drop-down list. If select

―enable‖, when there is an alarm, system will make beep voice.