Software Owner manual

NDVR Server Manual

【Send Alarm to client】Select sending alarm to network clients or not.

【Motion Alarm Sound 】 Press button to selects a ―.wav‖ sound File

for a motion alarm. If there is a motion alarm, the sound file will be played.

Also, you can test it by pressing button.

【Send email】Set the send email alarm function disable or enable when

the cameras test abnormally.

【Send sms】Set the send sms alarm function disable or enable when the

cameras test abnormally.

【Video Loss Alarm Sound 】Press button to selects a ―.wav‖ sound

File for a video loss alarm. If there is a video loss alarm, the sound file will be

played. Also, you can test it by pressing button.

【Trigger DO Output】Select which DO ports will be triggered by above

camera alarms.

Schedule Setup (Setting for cameras of local board cards, IP Cameras

are not included.)

1. Motion & Video Loss (Red): NDVR System responds with Motion

Detection and Video Loss alarm in specified time;

2. Motion Alarm (Blue): NDVR System only responds with Motion

Detection alarm in specified time;

3. Video Loss (Yellow): NDVR System only responds with Video Loss

alarm in specified time;

4. Not Check (gray): NDVR System doesn’t respond with any alarms in

specified time.

Note: