Software Owner manual

NDVR Server Manual
77
, Set the time to post or pre
the record.
3.4 PTZ control
Press button to set PTZ.
In this screen, you can define the PTZ protocol and set the Preset Position as
well as the plan to execute them automatically.
【Camera】Select the camera to be set from the drop- list.
【Baud rate】Set baud rate according to PTZ protocol from the drop- list.
【PTZ Protocol】Select the communication protocol for the PTZ camera
from drop-list.
【Copy to】After finishing one channel, if you want to set any other
channels’ configuration as the same as this camera, you can select channel
number from drop-list, and press button.