Software Owner manual

NDVR Server Manual

【PTZ Address】Set the address of the decoder, which must be matched

with the value of dipswitch in the PTZ.

【Speed】Set the speed of the PTZ.

【Preset position & schedule setup】Define preset position and set time

to call preset position automatically. System can add and delete plan time.

【Name】 Set the name for the current preset. 【Preset】 Set the preset

number for the current camera Add the preset by current

configuration. Delete the finished Preset. Call the Preset if

the Mode is Call preset. The mode is save preset; you should save the preset

and shouldn’t call the preset.