Specifications

© Digital View Ltd 2010 www.digitalview.com Page 7 of 34
LCD DISPLAY SYSTEM SETTINGS
NOTE: By way of explanation the following refers to a set of sample buttons that may be obtained as an option. In addition
to power on/off and connection for backlight brightness the controller provides an On Screen Display of certain functions
which are controlled by 5 momentary type buttons (analog VR type) or 8 momentary type buttons (digital type):
Controls Analog VR type Digital type
On/Off – turns controller board power on VR toggle switch On/Off button
Brightness – controls backlight brightness Rotary VR Brightness +/- buttons
Menu – turns OSD menu On or Off (it will auto time
off) (Function with signal input only)
Menu button Menu button
Select – Select function / Confirm
(under OSD menu on state)
SEL DN SEL DN
Move up to select individual RGB color level OSD
page
(under OSD menu on state)
SEL UP SEL UP
+ – increase the setting / moves the selector to the
next function
(under OSD menu on state)
+ +
- - decrease the setting / moves the selector to the
previous function
(under OSD menu on state)
- -
Load factory default Press and hold SEL DN
botton to power on the
controller
Press and hold SEL DN
botton to power on the
controller
Lock OSD menu
(Function with signal input only)
Press and hold MENU
button for 15 seconds to
enable / disable lock of the
OSD menu
Press and hold MENU
button for 15 seconds to
enable / disable lock of the
OSD menu
Switch to next input source
(under OSD menu off state)
+ +
OSD Functions
Selection page
Select input source4
Select input source to Analog RGB
Select input source to DVI
Select input source to S-Video 1
Select input source to Composite 1
Select input source to S-Video 2 (No function now)
Select input source to Composite 2 (No function now)
Auto Source Seek
ON – Auto source select always enable
OFF – Disable auto source select function
Video system selection* 4
ON/Off/Brightness
SEL UP
SEL DN
+
-
Menu
Analog VR type
Digital type