User guide

4-3
4
Client Software Configuration
2
1
3
5
I
A
4.2.1 Gang Settings
With the Gang settings you can set the VENICE server into a multi-
device operation mode.
Figure 4-2: Gang settings
It provides the following items:
Multi-device mode Sets the multi-device role for the connected
channel, i.e. whether it should act as slave or
master. For the slave role you can also select
timecode chasing.
Timecode chase
offset
If for the slave role a timecode chasing has
been selected, this entry field will be available.
With it you set the offset for the timecode chas-
ing (in frames). The edit lag of VENICE will be
observed as well (see section “RS-422 Control”
on page A-1).