User guide

4-10
VENICE Administration and Configuration User Guide
Sync Analog
The sync analog settings set the synchronization of the analog output:
V phase Adjusts the vertical phase of the sync output
signal relative to the input sync signal. The out-
put signals will be altered accordingly, i.e. the
time base of the output signals will be generally
altered. The value is in lines.
Type Determines the type of sync for the analog
component signal (RGB). You can select be-
tween a bilevel, trilevel or TTL synchronization
(e.g. with ... HF VR as 'horizontal falling'
and 'vertical rising') on the analog sync output.
Furthermore, with the ... (on green) set-
tings you can enable a bilevel or trilevel sync
signal on the green channel of the analog out-
put. The setting Automatic uses the default
sync output mode of the currently set raster.
H phase Adjusts the horizontal phase of the sync output
signal relative to the video output signal. The
effect will be that you move the given out im-
age content horizontally relative to the sync
signal. The value is for SD video rasters in half-
pixels, for all others in full pixels.
V phase Adjusts the vertical phase of the sync output
signal relative to the video output signal. The
effect will be that you move the given out im-
age content vertically relative to the sync sig-
nal. The value is in lines.