Specifications

5-17
Maintenance
2
1
3
I
4
A
5
The system will now boot from the internal USB and you will see a win-
dow on the screen where you can select the DVS Rescue environment
for loading:
 Select DVS Rescue and press [Enter] on your keyboard.
Once the loading has finished, you will see the DVS Rescue script with
its options on the screen. Your display should look similar to the follow-
ing:
--- DVS Rescue ---
1 - Backup on internal USB device
2 - Restore from internal USB device
3 - Reboot the system
4 - Poweroff the system
0 - Exit
Enter selection:
 To restore your system disk from the internal USB, press [2] and
then [Enter] on your keyboard.
Afterwards a list of possible target devices will be detailed on the
screen. In a VENICE 2U/Element, the system device normally will be
’sda’, but on special systems it may also be ’sdb’, ’sdc’, etc.
The system will ask you to enter the system device:
 Enter the name of the system disk in the designated line. Just type
in sda (in other cases sdb or sdc) and press [Enter] on your key-
board.
A further list of possible source images will be detailed on the screen.
If there is only the DVS recovery image on the USB flash drive, this one
will be listed. If there are several images, all will be displayed.
 Select the image you want to use for the recovery by pressing the
arrow keys on your keyboard. Normally, it provides the serial num-
ber of the DVS system in its name. To confirm your choice press
[Enter] on your keyboard.
The system will ask you to confirm your selection and whether you
want to continue:
If you do not perform any action, DVS Rescue will be loaded
automatically after 30 seconds.
Ex factory the DVS system will be delivered with ’sda’ as the
default system disk. If other configurations have been made
later or on customer request, this may be different.
Continue with the following steps only, when you are able to
identify the correct target device.
A recovery will overwrite all your data.