Installation guide

DVTel CF-4221-00 Fixed IP Camera User & Installation Guide
10
4.4 Mounting the DVTel CF-4221-00 Fixed IP
Camera
To mount a DVTel CF-4221-00 Fixed IP Camera
Warning: The HD Series Indoor Camera must be kept in a clean and dry indoor environment
or in a protective camera housing. Operating temperature should be maintained within 0°C ~
50°C (14° ~ 122°F). Operating humidity 10% to 90% (non-Condensing). The camera should
be kept dry, free from water condensation, dust, dirt, and smoke.
1.) Do the following:
 For Indoor installations (no housing):
a.) Install on the ceiling/wall/ flat surface, a security camera wall mount bracket stand that
is sturdy enough to hold the camera in a fixed position for the field of view required.
b.) Screw the bracket/stand to the mounting socket on the bottom of the camera.
 For Indoor/Outdoor installations using a typical protective camera housing:
For outdoor installation, the camera must be installed in a protective housing such as a
DVTel CF-X201-00 camera housing.
CF-X201-00 Camera Housing
a.) Thread the wires through any of the
infrastructure and brackets (e.g. pole
bracket/corner bracket/etc.) as needed as
well as through the wall bracket arm.
b.) Bolt the wall bracket (Arm) to the prepared
surface.