Installation guide

DVTel CF-4221-00 Fixed IP Camera User & Installation Guide

For Indoor/Outdoor installations using a protective camera housing:

a.) Support the camera housing and loosen the tension bolt on the bracket pan/tilt

assembly enough that it allows you to reposition the camera housing.

b.) Move the housing so that the camera field of view is optimized for your scene and

retighten the tension bolt on the wall bracket pan/tilt assembly.

c.) On the camera, adjust the zoom ring and focus ring on the lens for your scene. If you

have a manual Iris, also adjust the iris ring on your lens.

d.) Adjust the camera and base plate by moving it either forward or backward so that the

camera lens close enough to the glass that it reduces the possibility of reflection but

does not make contact with the glass.

e.) Tighten the base plate securely in place and close the camera housing lid.

f.) Close the latch or tighten the screws firmly so that the lid seal is properly maintained.