Installation guide

DVTel CF-4221-00 Fixed IP Camera User & Installation Guide

6.3.1 Host Name and System Time Setting

Press the first category: <System> in the left column; the page is shown as below.

Host Name

The name is for camera identification. If alarm function (see section Application is enabled

and is set to send alarm message by Mail/FTP, the host name entered here will display in the

alarm message.

Time Zone

Select the time zone you are in from the drop-down menu.

Enable Daylight Saving Time

To enable DST, please check the item and then specify time offset and DST duration. The

format for time offset is [hh:mm:ss]; for instance, if the amount of time offset is one hour,

please enter “01:00:00” into the field.