User manual

PROFESIONAL, CREDITABLE, SUCCESSFULL DWIN DGUS v2.0 Specification
Beijing DWIN Technology Co., Ltd. - 16 - www.dwin.com.cn/en
4.4 Slider Adjustment (0x03)
Add.
Defination
Data Length
Description
0x00
Pic_ID
2
Page ID
0x02
TP_Area
8
Touch button areas: (X
s
, Y
s
) (X
e
, Y
e
)
0x0A
Pic_Next
2
Page ID that will switch to, 0xFF** means no page switches. Must be 0xFF**
0x0C
Pic_On
2
Page ID that shows the effect animation when button pressed, 0xFF** means that
there is no button pressing effect. Must be 0xFF**
0x0E
TP_Code
2
0xFE03
0x10
0xFE
1
0xFE
0x11
*VP
2
Variable address pointer
0x13
Adj_Mode
1
 High 4 bit defined the format of return data:
0x0*= adjust VP word address (integer)
0x1*=adjust the high byte of word data in VP word(1 byte unsigned number,
VP_H)
0x2*= adjust the low byte of word data in VP word(1 byte unsigned number,
VP_L)
 Low 4bit defined the slider method:
0x*0 =horizontal drag, 0x*1=vertical drag.
0x14
Area_Adj
8
Working effective Region: Xs, Ys, Xe, Ye; and MUST BE identical to TP_Area
(touch region).
0x1C
V_begin
2
The return value corresponding to starting position, integral number.
0x1E
V_end
2
The return value corresponding to end position, integral number.
Notes: In case of any operation mistakes, pressing and drag begin to work 0.5s later.
As shown above, scale function indications is actualized by Variable 0x02 (Please see Chapter 5.1.3)
The advantage of slider input is visible, easy and convenient to operate, and no possible for over the range.
If the higher accuracy of the variable input is required, use the Data Variable Show (Variable 0x10) to show the slider
values in the display.