Product Overview

455
Miscellaneous Accessories
ACCESSORIES
ACCESSORIES - GAGE FLUIDS
A-101
ACCESSORIES - MISCELLANEOUS
ACCESSORIES - KITS FOR AIR FILTER SWITCHES
A-102 A-103 A-104
A-602 A-603 A-604
A-351 A-352 A-353 A-354 A-356
A-357 A-363 A-364 A-366 A-397
A-464 A-465 A-362 A-368 A-369
A-370 A-371 A-395 A-497 A-300
A-360
DWYER INSTRUMENTS, INC. | dwyer-inst.com
USA: California Proposition 65
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
MODEL CHART
Model Description
Red gage uid, .826 sp. gr. The standard uid for use in inclined manometers, “D”
type vertical manometers and all Dwyer gages using red uid.
A-101
A-102
A-103
A-104
1 oz unbreakable plastic dispenser bottle
4 oz plastic bottle with screw cap
1 pt plastic bottle with screw cap
1 qt plastic bottle with screw cap
Blue gage uid, 1.910 sp. gr. For special instruments and Mark II Models 26 and 28.
A-110
A-111
1 oz unbreakable plastic dispenser bottle
1 pt plastic bottle with screw cap
Violet gage uid, 1.000 sp. gr. Use in place of water if better meniscus is desired.
A-120
A-121
A-122
1 oz unbreakable plastic dispenser bottle
4 oz plastic bottle with screw cap
1 pt plastic bottle with screw cap
Fluorescein green color concentrate, water coloring agent. Not to be used full
strength. Add 3/4 oz to a quart of distilled water. Contains a wetting agent to improve
the meniscus characteristics. Use in vertical manometers only.
A-126 1 oz unbreakable plastic dispenser bottle
Caution: Use only Dwyer uids in Dwyer gages.
MODEL CHART
Model Description
A-298
A-299
A-300
A-351
A-352
A-353
A-354
A-356
A-357
A-360
A-362
A-363
A-364
A-366
A-368
A-369
A-370
A-371
A-395
A-397
A-464
A-465
A-497
Flat aluminum bracket for ush mounting Capsuhelic
®
gage, 603A, 605,
and 3000MR
Mounting bracket, ush mount Magnehelic
®
gage in bracket, bracket is then
surface mounted, steel with gray hammertone epoxy nish
Flat aluminum bracket for ush mounting Magnehelic
®
gage
Pinch clamp to seal rubber tubing, as in a leakage test
Magneclip, slip on magnetic holder for acrylic plastic gages, per pair
Magnetic mounting, at style, secures to owmeter, etc. with 6-32 machine
screw and boots insert
Magnetic mounting, edge style, secures edge of acrylic manometer with
10-32 machine screw and boots insert
Gage plug with retainer loop, polyethylene plastic, for 1/4˝ ID tubing, slip
loop over tubing OD and insert plug for seal
Thermometer and terminal tube holder, SS wire
Aluminum DIN rail, 1 m
Stand-hang bracket, aluminum, for Minihelic
®
II gage
Scale clamp bar for 1221 manometer
Magnet assembly for 1222 manometers, 2 required (3 required for 1222-36
and M-1000)
Manometer cleaning brush 1/4˝ OD x 2-1/8˝ long, attach to wire for use
Surface mounting plate, aluminum, for Magnehelic
®
gage
Stand-hang bracket, aluminum, for Magnehelic
®
gage
Mounting bracket, ush mount Capsuhelic
®
gage or Series 631B transmitter
in bracket, bracket is then surface mounted, steel with gray hammertone
epoxy nish
Surface mounting bracket, use with Photohelic
®
gage on horizontal or
vertical surfaces, also for Capsu-Photohelic
®
gages on vertical only
Surface mounting bracket for Series 4000 Capsuhelic
®
gages, steel with
gray hammertone epoxy nish
Rugged step drill quickly provides true round holes in thin materials, ideal
for installation of Dwyer pitot tubes in sheet metal duct, no centerpunch
needed to steel, drills 3/16˝ through 1/2˝ holes in 1/16˝ increments
Flush mount kit for Magnehelic
®
gages
Flush mount space pressure sensor
Surface mounting bracket for Minihelic
®
II gage, steel with satin black nish
MODEL CHART
Model Description
A-602
A-603
A-604
Air lter kit, accessory package for using switch without a gage includes
two pressure tips with integral compression ttings, two 5´ lengths of 1/4˝
aluminum tubing and two 1/8˝ NPT to 1/4˝ tubing compression ttings
˝T˝ kit, accessory package for using pressure switch in conjunction with an
air lter kit equipped Magnehelic
®
or Series 250 AF gages includes two 1/8˝
NPT to 1/4˝ tubing compression ttings and two compression tees
˝T˝ kit, accessory package for using pressure switch in conjunction with
Mark II gages, includes two plastic tubing connector tees and two plastic
tubing to 1/8˝ NPT adapters