Owner's manual

45 | P a g e
2. Engineering Units
The Engineering Units tab will be the same as Engineering Units Software level.
NOTE: The edibility of the Device Units and Engineering Units tabs will be opposed so they cannot be edited at
same time.
Trigger Settings
Select Trigger Settings from the Device Menu: Start Device or Identify Device and Read Status.
This command is only available when the data recorder has the Trigger feature. The trigger screens
offered depend on the type of data recorder connected to the host computer. Trigger screen samples
are shown below.
• Device has one triggered channel
Trigger formats with one mode of operation fall into two types: With or Without settable sample
count.