Owner's manual

49 | P a g e
Device Menu: Quick Start
Select Quick Start from the Device Menu to start the device without asking for any settings. It will
use the previously set user ID and reading rate. This is useful for saving time, especially when
programming multiple devices with the same parameters.
Device Menu: Batch Start
Select Batch Start from the Device Menu to display the following window:
Device Parameters Tab
The Device Parameters tab has similar functions as Start Device. The availability of Device ID
field, Extended ID field, Reading Rate, and Wrap Around field (option available depending on
device) depends on the selections in the Configuration tab. If the device has the alarm setting feature
then a corresponding button will be displayed on the screen. An Alarm Settings button is displayed
on the screen above.