User Manual

Menu Item Default Set At Description
AL1 Hi Alarm 1 Function (selectable off, lo, hi, hilo, sf, ot, or sfot)
A1t Alarm Type 1 (selectable abs (absolute)
or de (deviation))
A1rE OnOf Alarm 1 Reset (selectable onof (auto)
or hold (manual))
A1 Pi Alarm 1 Power Interrupt (selectable on or off)
A1iH OFF Alarm 1 Inhibit (selectable on or off)
A1St CLOS Alarm 1 Output State (selectable close
or open)
A1LP O on Alarm 1 Lamp condition when contact
is closed (selectable on or off)
Secure
A1td OFF Alarm 1 Time Delay (selectable off or 1
to 8000 seconds)
AL2 Lo Alarm 2 function ( selectable off, lo, hi, hilo, sf, ot, or sfot)
A2t AbS Alarm 2 Type (selectable abs (absolute)
or de (deviation))
A2rE OnOf Alarm 2 Reset (selectable onof (auto) or
hold (manual))
A2Pi OFF Alarm 2 Power Interrupt (selectable on or off)
A2iH OFF Alarm 2 Inhibit (selectable on or off)
A2St CLOS Alarm 2 Output State (selectable close or open)
A2LP O on Alarm 2 Lamp condition when contact is
closed (selectable on or off)
A2td OFF Alarm 2 Time Delay (selectable Off or 1 to
8000 seconds)
Filt 3 Digital Filter
POH 23.1 Process Output High (default is in feet)
POL 0.0 Process Output Low (default is in feet)
EXAMPLE PROGRAMMING CHART continued
MERCOID
A Division of Dwyer Instruments, Inc.
P.O. BOX 258 • MICHIGAN CITY, INDIANA 46361, U.S.A.
Phone: [phone] • Fax: [phone]
www.dwyer-inst.com • e-mail: [e-mail]
Copyright 2010 by Dwyer Instruments Inc. Printed in U.S.A. 10/10
L-20:L-20 2/24/11 10:00 AM Page 31