User guide

Multi Process Meter Instruction Manual
27
Front Panel Buttons and Status LED Indicators
 Press the Menu button to enter or exit the Programming Mode at
any time.
 Press the Right arrow button to move to the next digit during digit or
decimal point programming.
 Press or hold the Up arrow button to scroll through the menus,
decimal point, or to increment the value of a digit.
 Press the Enter button to access a menu or to accept a setting.
 Press and hold the Menu button for three seconds to access the
advanced features of the meter.
Button
Symbol
Description LED Status
Menu
1-8 Alarm 1-8 indicator
Right arrow/F1
1-8
M
Flashing: Relay in
manual control mode
Up arrow/F2
T Flashing: Tare
Enter/F3
1-8
Flashing: Relay
interlock switch open
Note:
F4 is a digital input. Alarms 5-8
are enabled when relay
expansion module is installed.
Note:
LEDs for relays in manual mode
flash with the “M” LED every 10
seconds. “M” flashing by itself
indicates Aout – manual control
is used.