User guide

Multi Process Meter Instruction Manual

Setting the Display Parameter & Intensity (dsplay)

The upper display (Big) can be programmed to display:

1. Process value 1 (PV1)

2. Process value 2 (PV2)

3. Percent of PV1 (PCT)

4. Relay set points

5. Max & min values

6. Modbus input

7. Display reading and units

8. Display gross

9. Toggle net & gross

The lower display (Little) can be programmed to display:

1. Unit

2. Process value 1 (PV1)

3. Process value 2 (PV2)

4. Percent of PV1 (PCT)

5. Relay set points

6. Max & min values

7. Engineering units or custom legends

8. Modbus input

9. Off (no display)

10. Toggle reading and units

11. Display gross

12. Toggle net/gross

Display Intensity: The meter has eight display intensity levels to give

the best performance under various lighting conditions. Select intensity

8 for outdoor applications. The default intensity setting is 8.