User guide

Multi Process Meter Instruction Manual

Select Menu (SElect)

The Select menu is used to select the signal input conditioner applied

to the input (linear, square root, programmable exponent, or round

horizontal tank), low-flow cutoff, and analog output programming. The

multi-point linearization is part of the linear function selection.

Signal Input Conditioning (Functn)

The Function menu is used to select the signal input conditioner

applied to the input: linear, square root, programmable exponent, or

round horizontal tank volume calculation. The multi-point linearization

is part of the linear function selection.

Meters are set up at the factory for linear function with 2-point

linearization. The linear function provides a display that is linear with

respect to the input signal.